Use and Care Manual

SPEED-WALL
®
GPS-5000 Series
Architectural Coatings Speed-Wall Interior Semi-Gloss Latex Paint
GENERAL DESCRIPTION PRODUCT DATA
Speed-Wall Latex Paint is an economical interior vinyl acrylic paint
designed for the high volume multi-family housing segment. This
professional quality semi-gloss finish delivers high production with its
good dry hide and quick dry and recoat when applied by brush, roller
or spray. This low-VOC, low odor paint enables a space to be paint-
ed while occupied. Ideal for use on properly prepared interior walls
and ceilings. Use on primed or previously painted properly prepared
drywall, plaster, masonry, wood, and metal surfaces.
PRODUCT TYPE: Vinyl Acrylic Latex
SHEEN: Semi-Gloss, 35-45 @ 60º
VOLUME SOLIDS*: 26% +/- 2%
WEIGHT SOLIDS*: 34% +/- 2%
WEIGHT/GALLON*: 9.4 lbs. (4.3 kg) +/- 0.2 lbs. (91 g)
VOC: <50 g/L (0.4 lbs./gal.)
*Product data calculated on product GPS-5110.
COVERAGE: Approximately 300-400 sq. ft. (27.9-37.2 sq. meters) per
U.S. Gallon (3.78L) on smooth, nonporous surfaces.
Wet Film Thickness: 4.0-5.3 mils
Wet Microns: 102-135
Dry Film Thickness: 1.0-1.4 mils
Dry Microns: 25-36
Coverage figures do not include loss due to surface irregularities and
porosity or material loss due to application method or mixing. Some col-
ors, drastic color changes, or porous substrates may require more than
one coat to achieve a uniform finish.
DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity.
To Touch: 30 minutes
To Recoat: 2 hours
To Full Cure: 30 days
Drying times listed may vary depending on temperature, humidity, color,
film build, and air movement.
CLEANUP: Clean hands and tools immediately with warm, soapy water.
Clean spills right away with a damp cloth.
DISPOSAL: Contact your local environmental regulatory agency for
guidance on disposal of unused product. Do not pour down a drain or
storm sewer.
FLASH POINT: Over 200ºF (93ºC)
RECOMMENDED SUBSTRATES
Concrete Plaster
Ferrous Metal Wood
Gypsum Wallboard-Drywall
CONFORMANCE STANDARDS
VOC compliant in all regulated areas
TINTING AND BASE INFORMATION
GPS-5000 White
GPS-5110 Base 1
GPS-5020 Antique White
GPS-5010 Swiss Coffee
Refer to the appropriate color formula book, automatic tinting
equipment, and or computer color matching system for color formu-
las and tinting instructions.
PACKAGING
1-Gallon (3.78 L)
5-Gallon (18.9 L)
Not all products available in all sizes.
LIMITATIONS OF USE
FOR INTERIOR USE ONLY. Apply when air, product and surface tem-
peratures are between 50ºF (10ºC) and 90ºF (32ºC). USE WITH ADE-
QUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN. Read
all label and Safety Data Sheet (SDS) information prior to use. SDS are
available through our website or by calling 1-800-441-9695.
Not recommended for use on floors or in high humidity areas.
PROTECT FROM FREEZING.
FEATURES / BENEFITS
Good Dry Hide
Quick Dry & Recoat Time
Uniform FInish
Read Label and Material Safety Data Sheet Prior to Use. See other cautions on last page.
GPS-5000 Series