User Manual

Wireless Monitor – System Setup

1. Components 2. Transmitter setup

Monitor

Male-Male

AV cable

adapter

Charger

Receiver.

on-board

battery

and/or DC

supply

Transmitter.

A 9V battery

(not supplied)

is needed to

power up the

transmitter

Mount Transmitter on

your camera’s hot shoe

Plug mini USB

plug into you

camera video

output

Plug Transmitter’s AV

cable into mate-to-

male adapter

Connecting

cable

Plug yellow AV

plug of the

connecting cable

in the other end of

the mate-to-male

adapter

PAGE 1
Wireless Monitor – System Setup 1. Components 2. Transmitter setup Mount Transmitter on your camera’s hot shoe Monitor Receiver. Powered by on-board battery and/or DC supply Plug mini USB plug into you camera video output Plug Transmitter’s AV cable into mate-tomale adapter Transmitter.
PAGE 2
Video Feed: Plug Receiver’s yellow AV cable into monitor’s yellow AV cable 3. Receiver setup OPTIONAL: Power up the Receiver and Monitor by connecting the receiver to the supplied DC charger Power Supply: Connect Monitor’s red plug into the Receiver’s Plug Slide Receiver onto the back of the Monitor. 4.