User's Manual

12
Figure 21
Now, insert the TELESCOPING POST with the
EXPANDABLE BASE PLATFORM up in to the
CENTRAL POST.
(See Figure 21)
Figure 22
The TELESCOPING CLAMP ADJUSTMENT
KNOB should be aligned with the center of the
EXPANDABLE BASE PLATFORM. To align
the TELESCOPING CLAMP ADJUSTMENT
KNOB simply rotate the entire CENTRAL
POST into the correct position, and tighten the
ADJUSTMENT KNOB. Also leave about one
inch of the TELESCOPING POST showing
below the TELESCOPING CLAMP. Having the
TELESCOPING CLAMP ADJUSTMENT KNOB
aligned correctly, although not technically needed
to make your Glidecam HD-PRO function correctly,
does make it easier to reach the knob later when
you use it.
(See Figure 22)
Figure 23
Securely tighten the ADJUSTMENT KNOB on
the TELESCOPING CLAMP by rotating the knob
clockwise.
(See Figure 23)
NOTE: The ADJUSTMENT KNOB should only
be tightened by hand.
WARNING: Do not over tighten the
ADJUSTMENT KNOB as it could cause thread
stripping.