User's Manual

13
Figure 24
At this point your Glidecam HD-PRO should have
the CENTRAL POST and TELESCOPING POST
aligned correctly on the EXPANDABLE BASE
PLATFORM assembly.
(See Figure 24)
NOTE: The amount of COUNTER WEIGHTS will
vary depending on your Camera weight. Don’t
worry about this to much, for later you will set
the number of COUNTER WEIGHTS to the correct
amount required for you specic Camera.
Figure 25
Next, locate the THREADED INSERT which can be
found in the top of the CENTRAL POST.
(See Figure 25)
Figure 26
Rotate and screw the CAMERA MOUNTING
PLATFORM into the THREADED INSERT in the top
of the CENTRAL POST.
(See Figure 26)
WARNING: Do not over tighten the CAMERA
MOUNTING PLATFORM as it could cause damage
to the internal threaded insert in the top of the
CENTRAL POST.