User's Manual

Figure 27

There are two ways to create this correct alignment.

The rst and easiest is to loosen the ADJUSTMENT

KNOB on the TELESCOPING CLAMP and rotate

the parts until correctly aligned. Then simply tighten

the ADJUSTMENT KNOB.

(See Figure 27)

NOTE: Remember to leave at least one inch of

the TELESCOPING POST showing below the

TELESCOPING CLAMP.

Figure 28

The second method to correctly align the parts is to use an Allen Wrench to loosen the

“Screw” on the top part (See Figure 27) of the TELESCOPING CLAMP until you can rotate

the parts so they are correctly aligned. Then simply tighten the screw.

(See Figure 28)

NOTE: The second method of alignment is better because it keeps the TELESCOPING

CLAMP ADJUSTMENT KNOB aligned correctly (See Figure 22). Having the

TELESCOPING CLAMP ADJUSTMENT KNOB aligned correctly, although not

technically needed to make your Glidecam HD-PRO function correctly does make it

easier to reach the TELESCOPING CLAMP ADJUSTMENT KNOB later when in use.