User's Manual

4
#2 GLIDECAM HD-PRO PARTS AND
COMPONENTS
Figure 1
When you unpack your Glidecam HD-PRO you will
see that some Assembly is required. The contents of
the Glidecam HD-PRO box includes the following:
(See Figure 1)
MANUAL
CENTER POST
QUICK RELEASE PLATE
CAMERA MOUNTING PLATFORM
EXPANDABLE BASE PLATFORM
TELESCOPING POST
HARDWARE BAG
COUNTER WEIGHTS
TOOLS NEEDED: You will need a Standard and
Phillips Head Screwdrivers. (Not included.)
You will also need a 3/16th allen wrench (Not
included.)
Figure 2
This is the Glidecam HD-PRO CENTRAL POST
with attached Gimbal assembly.
(See Figure 2)
WARNING: Do not adjust or tighten the factory
settings on the Gimbal, Handle, and Yoke. These
parts should remain loose and move freely, for
proper operation.
Figure 3
These are the pieces that makeup the HEAD
ASSEMBLY of the Glidecam HD-PRO
1) QUICK RELEASE PLATE
2) CAMERA-MOUNTING PLATFORM
(See Figure 3)