User Manual

1514
Figure 30
Now place the MID PLATE on top of the BOTTOM
PLATE.
Figure 31
Insert the BLACK THUMB SCREWS through the
slots in the BOTTOM PLATE and into the threaded
inserts in the bottom of the MID PLATE.
Figure 32
At this point you should have four BLACK THUMB
SCREWS securing the MID PLATE to the BOTTOM
PLATE.
In the next section (section #3) you’ll be attaching
your HEAD PLATE and attached camera to the MID
PLATE.
#4 ATTACHING YOUR CAMERA TO THE
GLIDECAM XR-SERIES
Figure 33
***PLEASE NOTE*** These photographs show the
Glidecam 2000 PRO for illustrative purposes.
Now it’s time to attach your camera to the Glidecam
XR-SERIES.
Roll camera on pen to nd the center
of gravity, if needed.
Figure 34
First, nd the threaded insert on the bottom of your
camera.
THREADED INSERT
Figure 35
Remove the HEAD PLATE from the Glidecam XR-
SERIES and with the camera placed upside down
in your lap align the appropriate hole in the HEAD
PLATE with the threaded insert in the bottom of the
camera.
As shown in Figure 36.