Assembly Instruction BAR STOOL
PRE-ASSEMBLY PREPARATION • CARE AND CLEANING: DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. • MAINTENANCE: Check bolts/screws periodically and tighten them if necessary. • WARNING: DO NOT USE if this product become damaged, and/or components are broken or missing. • REMINDER: DO NOT fully tighten all bolts until assembly is completely finished.
STEP 1 Insert the Gas Lift (D) and Cap (E) to the Base (C). D Warning! Please remove the plastic cap before assembly. E C STEP 2 Attach the Leg (B) to the Seat (A) by using Allen Bolt (F) and Allen Wrench (G).
STEP 3 Insert the Leg (B) to the Gas Lift (D) of the base Part as shown below. A B D C After initial assembly, the product may acclimate to its new environment. Please unsure all screws are still securely tightened.
