Assembly Instruction PATIO WICKER STORAGE BOX
PRE-ASSEMBLY PREPARATION WARNING! DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT DUE TO THE POSSIBLE RISK OF FINGER ENTRAPMENT • Please read through this instruction before beginning assembly. • Two adults assembly is recommended. • Clear out the space for assembly and lay out all parts base on Parts List, extra room will allow you to easily determine if all the pieces are present. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
STEP-BY-STEP ASSEMBLY STEP 1 Attach Side Panel (B) on both side to Base Panel (A) by using 4 Bolts (H) and 4 Washers (J). B A B J H STEP 2 Attach Front Panel (C), velcroBack Panel (D) to the side panel on both side and base panel by using 14 Bolts (H) and 14 Washers (J).
STEP 3 Attach the hinges to back panel and secure them by using 9 Bolts (G), 9 Washer (I) and 9 Screw Nut (K), then fix Lid Panel (E) with gaslift rod to both side panels by using 2 Bolts (H), 2 Washers (J) & (L).
STEP 4: Stick Polyester Bag (F) to the edge of lid by velcro strapes and let it inside of the box properly. F STEP 5: NOTE!! This is a storage box, not a stool. Do not sit on the cover.