Assembly Instruction 4 Piece Outdoor Aluminum Sectional Sofa Set with Cushions
PRE-ASSEMBLY PREPARATION WARNING! DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT DUE TO THE POSSIBLE RISK OF FINGER ENTRAPMENT • Please read through this instruction before beginning assembly. • Two adults assembly is recommended. • Clear out the space for assembly and lay out all parts base on parts List, extra room will allow you to easily determine if all the pieces are present. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
PANEL AND FITTINGS IDENTIFICATION Left Loveseat Panel (A) Qty: 1 Sofa Support Leg (F) Qty: 2 Right Loveseat Panel (B) Qty: 1 Table Leg (G) Qty: 4 Corner Seat Panel (C) Qty: 1 Table Top (H) Qty: 1 Back Panel (D) Qty: 6 Back Cushion (I) Qty: 6 Sofa Leg (E) Qty: 12 Loveseat Cushion (J) Qty: 2 Corner Seat Cushion (K) Qty: 1 HARDWARE LIST Bolt (L) M6 X 40mm Qty: 4 Wrench (Q) Qty: 1 Bolt (M) M6 X 35mm Qty: 24 Bolt (N) M6 X 20mm Qty: 64 Washer (O) Qty: 28 Gasket (P) Qty: 12 Connect Tape
NOTE: From step 1 to step 2 is for Left Loveseat Sofa assembly. Please find panel A, D and sofa leg E, F firstly. Step 1 Attach 4 Sofa Leg (E) to the Left Loveseat Panel (A) by using 16 short Bolts (N). N E E E A E Step 2 Attach two Back Panels (D) to the Left Loveseat Panel (A) by using 4 Gasket (P), 8 Washers (O) and 8 medium Bolts (M). Then attach 1 Sofa Support Leg (F) to the middle rod of seat panel by using 2 long Bolts (L) and 2 Washers (O).
NOTE: From step 3 to step 4 is for Right loveseat sofa assembly. Please find panel B, D and sofa leg E. F firstly. Step 3 Attach 4 Sofa Leg (E) to the Right Loveseat Panel (B) by using 16 short bolts (N) . N E E E B E Step 4 Attach two Back Panels (D) to Right Loveseat Panel (B) by using 4 Gasket (P), 8 Washers (O) and 8 medium Bolts (M). Then attach 1 Sofa Support Leg (F) to the middle rod of seat panel by using 2 long Bolts (L) and 2 Washers (O).
NOTE: From step 5 to step 6 is for Corner Sofa assembly. Please find panel C, D and sofa leg E firstly. Step 5 Attach 4 Sofa Leg (E) to the Corner Seat Panel (C) by using 16 short Bolts (N). N E E E E C Step 6 Attach two Back Panels (D) to the Corner Seat Panel (C) by using 4 Gasket (P), 8 Washers (O), and 8 medium Bolts (M).
NOTE: Step 7 is for Table assembly. Please find table leg G and table top H firstly. Step 7 Attach 4 Table Leg (G) to the table top (H) by using 16 short bolts (N). N G G G G H Step 8 Connect the Corner Sofa to the Left & Right Loveseat Sofa by using 4 Connect Tape (Q).
Step 9 Put on the Back Cushion (H) and Seat Cushion (I & J). Please make sure all bolts are properly tightened before use.
