Elm Plus, LLC Assembly Instruction ALUMINIUM SELF TILT MARKET PATIO UMBRELLA
PRE-ASSEMBLY PREPARATION WARNING! DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT DUE TO THE POSSIBLE RISK OF FINGER ENTRAPMENT • Please read through this instruction before beginning assembly. • Two adults assembly is recommended. • Clear out the space for assembly and lay out all parts base on Parts List, extra room will allow you to easily determine if all the pieces are present. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
Step 1 Take out upper and lower part from the box. Press the button, insert lower pole into upper pole. Note: Do not throw away the package until you find the Lower Pole! Step 2 Fix the umbrella with your umbrella base. Note: Umbrella base not included.
Step 3 Untie the band, crank handle to make the umbrella open. Step 4 Keep cranking, the umbrella will tilt automatically.
Step 5 Pull down the lower rotating handle, rotate the upper rotating handle, to switch shading direction. Step 6 Turn the crank handle anticlockwise to close umbrella. Note: Do not overexert hand crank after umbrella is closed completely, otherwise the umbrella may be damaged.
CARE AND MAINTENANCE • Clean umbrella with a damp cloth after use. • Do not scratch product with sharp tools. • When umbrella is not in use, please close and tie it. When umbrella is not in use for a long time, store it in a carton box. • Close umbrella if external wind force reaches up to 10.7m/s. • All the screws in the product should be locked completely. • Please make sure no obstacles are around within a 4m area or 5m height area when in use, otherwise the product may be damaged.
