Assembly Instruction PATIO WICKER STORAGE BOX
PRE-ASSEMBLY PREPARATION WARNING! DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT DUE TO THE POSSIBLE RISK OF FINGER ENTRAPMENT • Please read through this instruction before beginning assembly. • Two adults assembly is recommended. • Clear out the space for assembly and lay out all parts base on Parts List, extra room will allow you to easily determine if all the pieces are present. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
STEP-BY-STEP ASSEMBLY STEP 1 Attach Right Panel (A) and Left Panel (B) on both side to Base Panel (C) by using 4 Washers (I), 4 Bolts (J) and 4 Washers (K). A K J L C B STEP 2 Attach Front Panel (D) and Back Panel (E) to the Side Panel on both side and Base Panel by using 14 Washers (I) and 14 Bolts (J) and 14 Washers (K).
STEP 3 Attach Wicker Lid Panel (G) to Back Panel (E) by using 6 Bolts (L). G STEP 4 L Put Plastic Panel (F) to the bottom.
STEP 5 Fix gaslift rod on both side panels to Wicker Lid Panel (G). STEP 6 Stick Storage Bag (H) to the edge of lid by velcro strapes and let it inside of the box properly.
STEP 7 5 NOTE!! This is a storage box, not a stool. Do not sit on the lid.