ASSEMBLY INSTRUCTION BAR STOOL
PRE-ASSEMBLY PREPARATION • CAUTION: Assembly will require at least 2 adults. DO NOT use power tools. Please inspect all items BEFORE assembly. If for any reason you need to return this item,please kindly return it in its original packaging. • WARNING! 1. DO NOT let any sharp objects touch or rub the surface of the product. 2. When assembling, do not let children play around the working area. 3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up. 4.
STEP-BY-STEP ASSEMBLY PLEASE CAREFULLY UNPACK AND IDENTIFY EACH COMPONENT BEFORE BEGINNING ASSEMBLY. BEFORE YOU BEGIN, PLEASE REFER TO PARTS LIST TO MAKE SURE THAT YOU HAVE ALL PARTS.
STEP 1 Insert the Legs (D) to the Top Criss-Cross support (B) and Bottom Criss-Cross support (C) as shown in below diagram. B D C STEP 2 Attach the Legs (D) to Criss-Cross Supports （B&C）as shown in below diagram by using Allen Bolt (F) and Allen Wrench (J), Please tighten the bolts to 80%.
STEP 3 Attach the Bottom Criss-Cross support (C) to the Top Criss-Cross support (B) as shown in below diagram by using Allen Bolt (G) and Allen Wrench (J), Please tighten the bolts to 80%. 80％ J G B C STEP 4 Attach the Criss-Cross Supports（B&C）to the Seat (A) as shown in below diagram by using Allen Bolt (H), Allen Bolt (I) and Allen Wrench (J), please pay attention to distinguish the location of bolts (H,I). Please tighten the bolts to 80%.
STEP 5 Attach the Footrest (E) to the Legs (D) as shown in below diagram by using Allen Bolt (G) and Allen Wrench (J), Please tighten the bolts to 80%. 80％ J G E STEP 6 Use your body weight to adjust balance of this bar stool，then please 100% tighten all the bolts (F,G, H,I) all the way. 100％ Reminder!! Use Adjustable Leveler to adjust the level of bar stool if necessary.
STEP 7 Please recheck and ensure 100% tighten all the bolts (F,G, H,I) in this step. After initial assembly, the product may acclimate to its new environment. Please ensure all bolts are still securely tightened. Additional note about safety: Bolts may loosen during normal everyday use. They should be periodically inspected and re-tightened to prevent damage or injury. Remember to save your wrench to use to tighten.
