ASSEMBLY INSTRUCTION BAR TABLE
PRE-ASSEMBLY PREPARATION • CAUTION: Assembly will require at least 2 adults. DO NOT use power tools. Please inspect all items BEFORE assembly. If for any reason you need to return this item,please kindly return it in its original packaging. • WARNING! 1. DO NOT let any sharp objects touch or rub the surface of the product. 2. When assembling, do not let children play around the working area. 3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up. 4.
STEP-BY-STEP ASSEMBLY PLEASE CAREFULLY UNPACK AND IDENTIFY EACH COMPONENT BEFORE BEGINNING ASSEMBLY. BEFORE YOU BEGIN, PLEASE REFER TO PARTS LIST TO MAKE SURE THAT YOU HAVE ALL PARTS.
STEP 1 Attach the Leg-Base Part (C) and Leg-Top Part (B) by hand as shown in below diagram. C B STEP 2 Attach the Leg-Top Part（B) to the Table Top (A) as shown in below diagram by using Allen Wrench (G) and Allen Bolt (F) , Please tighten the bolts to 100%.
STEP 3 Insert Leg-Base Part (C) to the Base Cap (E) and the Base (D) as shown in below diagram. A B C E D STEP 2 4 After initial assembly, the product may acclimate to its new environment. Please ensure all screws are still securely tightened.
