Instructions / Assembly

Assembly Instruction
6
OPERATING INSTRUCTIONS
WARNING!
Before using this outdoor fire pit, make sure you have read, understood, and
are following all information provided of this manual. Failure to follow those
instructions can cause death, serious injury or property damage.
Lighting
1. Make sure there is only a small amount of ash at the bottom of the metal fire bowl.
2. Place a layer of dry kindling or a natural firestarter onto the center of the log grill.
3. Place above that layer the dry seasoned hardwood that is cut to lengths no more than 1/2in.
4. Use a match to light kindling or firestarter.
5. Replace the safeguard spark screen when the kindling or firestarter is lit.
Tending the Fire
You may need to shift and/or add logs for an ideal experience.
Reminders:
• Always wear protective gloves or a pot holder when tending a fire.
• Wait until glowing wood have developed before adding any additional wood.
• Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an
existing fire.
1. Use the long handled hook tool to carefully take away the spark screen.
2. Use the long handled hook tool to shift the logs to allow additional airflow.
3. If additional wood is required, place wood on top of the burning log. Be careful not to shift
ashes.
4. Replace the safeguard spark screen by using the fire tool.
Extinguishing
1. Allow fire to burn itself out.
2. Do NOT use water to extinguish as this is dangerous and can cause damage to this outdoor
fire pit.
！