Portable Air Conditioner YPF1 User’s Manual Thank you for selecting this super quality air conditioner. Please be sure to read this manual carefully before using it.
CONTENT Important Safety Tips Precautions........................................................................ 1 Product Introduction Main Parts and Components................................................ 2 Control Panel and Remote Controller................................... 3 Product Operation Placement and Installation................................................... 4 Operation Method............................................................... 6 Clean and Maintenance Drainage Method......
Precautions Please read the Manual carefully before operating the machine: This machine is for household use only. This machine is for indoor use only. Please place it in dry environment. Check power cord frequently. When power cord, plug or A/C is damaged, please don’t operate. If the power cord is not long enough, power extension cable can be used. Cable should not scatter at places where power cord may be pulled out or people may be stumbled.
Main Parts and Components 1. Handle 2. Air inlet (L) 3. Control panel 4. Wind guide bar 5. Caster 6. Remote controller 7. Air inlet (R) 8. Air outlet 9. Dehumidification drainage nozzle 10. Air inlet grille 11. Exhaust duct assembly 12.
Control Panel and Remote Controller Cooling model 1. Power key Press the key to turn ON/OFF the A/C. 4 2. Swing key Press this key at any time after turning on the A/C to swing the wind guide bar automatically. 3. Speed key Press the key to choose high/ Mid /low gear wind speed. 3 5 4.
Placement and Installation Placement Place it at even and dry place, and keep it at least 50cm away from its surrounding object. Installation Screw the exhaust duct assembly in the air outlet behind the panel (anticlockwise).
Insert the air exhaust hose into the window sealing plate, adjust opening width of window so that the window can match with the sealing plate properly; length of the sealing plate is adjustable. Incorrect installation It’s important to keep the exhaust duct smooth. Incorrect installation will affect work of the A/C. Prevent the exhaust duct from seriously bending. Ensure air can flow smoothly in the duct. Warning: The exhaust duct is designed especially for this model.
Operation Method Cooling mode When the A/C enters cooling mode automatically or cooling mode is selected after power ON, the cooling indicator lamp lights up. Press Up/Down key to adjust setting temperature (17°C~30°C). Press Speed key to choose High/Low speed. Wind mode When pressing mode key or choosing wind mode by pressing the remote controller, the wind indicator lamp lights up. Press Speed key to choose High/Low speed. Temperature can’t be set.
Timer mode In standby state, press the key to set ON time. Press Up and Down keys to set ON time (0~24H), and the timer indicator lamp lights up. In ON state, pressure the timer key to set OFF time. Press Up and Down keys to set OFF time (0~24H), and the timer indicator lamp lights up. Drainage Method This product is equipped with automatic water vaporization system. The condenser is cooled with the circulating of condensing water, so as to improve cooling efficiency and save energy.
Seasonal cleaning If the A/C will not be used for a long time: Pull out the water rubber stopper to drain . Run the A/C in wind mode for 2H till its interior is dry. Turn off the A/C and unplug. Wash the filter screen and reassemble it. Dismantle the exhaust duct and keep it properly. Cover the A/C with a plastic bag and place it at a dry place.
Intelligent Error Detection Error-detecting code Multi-functional defection E1 Error of the coil’s temperature sensor E2 Error of indoor temperature sensor E4 Anti-freezing protection: temperature of the coil is too low and the whole A/C is off. When temperature excesses 8℃, the protection is released and previous working state is recovered. Fuse Parameters Specification: Φ5×20mm Voltage: 115VAC Current: 3.