User’s Manual 2807700 Version 1.
Copyrights This manual is copyrighted and all rights are reserved. It does not allow any non authorization in copied, photocopied, translated or reproduced to any electronic or machine readable form in whole or in part without prior written consent from the manufacturer.
Table of Contents Introduction .......................................................1 Checklist.............................................................................. 1 Product Description............................................................. 2 Specifications ...................................................................... 3 Board Dimensions ............................................................... 4 Installations .......................................................
This page is intentionally left blank.
INTRODUCTION Introduction Checklist Your 2807700 Core 2 Duo motherboard package should include the items listed below: • The 2807700 motherboard • This User’s manual • 1 x I/O shield • 1 x IDE cable • 1 x SATA cable • 1 CD containing the following: • Chipset Drivers • Flash Memory Utility 2807700 User’s Manual 1
INSTALLATIONS Product Description The 2807700 Mini-ITX motherboard is designed for either the Intel® Core™2 Duo or Intel® Pentium® D processors of up to 1066MHz FSB. It is based on the Intel’s Q965 Express chipset and it comes with two single-channel DDR2 memory slots and 4GB memory capacity for faster system responsiveness and support of 64-bit computing. The new Global American, Inc motherboards are aimed for high performance PCs in the digital, communications and industrial sector.
INTRODUCTION Specifications Processor FSB Chipset BIOS Memory Video LAN USB SATA II IDE Audio LPC I/O Edge Connectors On Board Headers / Connectors Expansion RTC Watchdog Timer Digital IO Other Power Connector System Voltage Board Size Supports Intel Core 2 Duo processor (Conroe core) in LGA775 socket 533/800/1066 MHz Intel Q965 Chipset consisting of: • Intel Q965 Graphic Memory Controller Hub (GMCH) • Intel ICH8 I/O Controller Hub • Award BIOS: SPI interface only, supports ACPI, SMBIOS • Two 240-pin
INSTALLATIONS Board Dimensions 4 2807700 User’s Manual
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the 2807700 in order to set up a workable system. The topics covered are: Installing the CPU ........................................................................ 6 ATX Power Installation ............................................................... 6 Installing the Memory .................................................................. 7 Setting the Jumpers .....................................
INSTALLATIONS Installing the CPU The 2807700 motherboard supports an LGA 775 processor socket for Intel® Core 2 Duo processors. The LGA 775 processor socket comes with a lever to secure the processor. Refer to the pictures below, from left to right, on how to place the processor into the CPU socket. Please note that the cover of the LGA775 socket must always be installed during transport to avoid damage to the socket.
INSTALLATIONS Installing the Memory The 2807700 motherboard supports four DDR2 memory sockets for a maximum total memory of 4GB in DDR memory type. It supports DDR2 533/667/800. Basically, the system memory interface has the following features: Supports two 64-bit wide DDR data channels Available bandwidth up to 6.4GB/s (DDR2 800) for single-channel mode. Supports 256Mb, 512Mb, 1Gb DDR2 technologies.
INSTALLATIONS Setting the Jumpers Jumpers are used on the motherboard are used to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors and their respective functions. Jumper Locations on 2807700A/2807700B.................................... 9 JBAT1: Clear CMOS Contents.....................................................
INSTALLATIONS Jumper Locations on 2807700A/2807700B Jumper Locations on 2807700A/2807700B ................................... 9 JBAT1: Clear CMOS Contents .................................................... 10 JP1, JP2, JP3: RS232/422/485 (COM2) Selection ....................... 10 JP6: Processor Setting .................................................................. 10 J6: Power ON Setting ...................................................................
INSTALLATIONS JBAT1: Clear CMOS Contents Use JBAT1, a 3-pin header, to clear the CMOS contents. Note that the ATX-power connector should be disconnected from the motherboard before clearing CMOS. JBAT1 Setting Function Pin 1-2 Short/Closed Normal Pin 2-3 Short/Closed Clear CMOS JP1, JP2, JP3: RS232/422/485 (COM2) Selection COM1 is fixed for RS-232 use only. COM2 is selectable for RS232, RS-422 and RS-485. ID394: COM3 and COM4 are fixed for RS-232 use only.
INSTALLATIONS J6: Power ON Setting J6 Setting Function Pin 1-2 Short/Closed Power on by system button Pin 2-3 Short/Closed Power on by power supply AC on 2807700 User’s Manual 11
INSTALLATIONS Connectors on 2807700 The connectors on 2807700 allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on 2807700 and their respective functions. ATX1: 24-pin ATX Power Connector..............................................................14 ATX2: ATX 12V Power Connector .................................................................14 CPU_FAN1: CPU Fan Power Connector ..........................
INSTALLATIONS Connector Locations on 2807700A/2807700B ATX1: 24-pin ATX Power Connector................................................................................................... 14 ATX2: ATX 12V Power Connector ...................................................................................................... 14 CPU_FAN1: CPU Fan Power Connector ............................................................................................. 14 PWR_FAN1: SYSTEM Fan Power Connectors ................
INSTALLATIONS ATX1: 24-pin ATX Power Connector Signal Name 3.3V -12V Ground PS-ON Ground Ground Ground -5V +5V +5V +5V Ground Pin # 13 14 15 16 17 18 19 20 21 22 23 24 Pin # 1 2 3 4 5 6 7 8 9 10 11 12 Signal Name 3.3V 3.3V Ground +5V Ground +5V Ground Power good 5VSB +12V +12V +3.
INSTALLATIONS CN2: PS/2 Keyboard and PS/2 Mouse Connectors Keyboard Signal Pin # Mouse Signal Keyboard data 1 Mouse data N.C. 2 N.C. GND 3 GND 5V 4 5V Mouse (top) Keyboard clock 5 Mouse clock Keyboard (bottom) N.C. 6 N.C. CN1 J3: COM1/2 Serial Ports CN1 (COM1) is a DB-9 connector, while J3 are COM pin-header connectors.
INSTALLATIONS VGA1: VGA CRT Connector VGA1 is a DB-15 VGA connector located beside the COM1 port. The following table shows the pin-out assignments of this connector. Signal Name Red Blue GND GND VCC N.C. HSYNC DDCCLK Pin # 1 3 5 7 9 11 13 15 Pin # Signal Name 2 Green 4 N.C.
INSTALLATIONS F_USB1: USB0/USB1 Connector Signal Name Pin Vcc 1 USB03 USB0+ 5 Ground 7 Pin 2 4 6 8 Signal Name Ground USB1+ USB1Vcc S_ATA1, S_ATA2, S_ATA3, S_ATA4: SATA HDD Connectors Pin # Signal Name 1 Ground 2 TX+ 3 TX4 Ground 5 RX6 RX+ 7 Ground IDE1: Primary IDE Connectors Signal Name Pin # Reset IDE 1 Host data 7 3 Host data 6 5 Host data 5 7 Host data 4 9 Host data 3 11 Host data 2 13 Host data 1 15 Host data 0 17 Ground 19 DRQ0 21 Host IOW 23 Host IOR 25 IOCHRDY 27 DACK0 29 IRQ14 31 IDE1 Address
INSTALLATIONS J2: Digital I/O Connector (4 in, 4 out) This 10-pin digital I/O connector supports TTL levels and is used to control external devices requiring ON/OFF circuitry. Signal Name Ground Out3 Out2 IN3 IN2 Pin # 1 3 5 7 9 Pin # 2 4 6 8 10 Signal Name +5V Out1 Out0 IN1 IN0 J4: External Audio Connector for 7.
INSTALLATIONS J7: System Function Connector ATX Power ON Switch: Pins 1 and 2 This 2-pin connector is an “ATX Power Supply On/Off Switch” on the system that connects to the power switch on the case. When pressed, the power switch will force the system to power on. When pressed again, it will force the system to power off. Hard Disk Drive LED Connector: Pins 3 and 4 This connector connects to the hard drive activity LED on control panel. This LED will flash when the HDD is being accessed.
INSTALLATIONS ID394 LPC Serial Ports Adaptor Card J1 J2: COM3/4/5/6 Serial Ports J1 - COM3/4 pin-header connector. PIN1~PIN10 COM3 PIN11~PIN20 COM4 J2 - COM5/6 pin-header connector.
INSTALLATIONS ID395 WINBOND WPCT200 for TPM1.
INSTALLATIONS This page is intentionally left blank.
BIOS SETUP BIOS Setup This chapter describes the different settings available in the Award BIOS that comes with the board. The topics covered in this chapter are as follows: BIOS Introduction ........................................................................ 24 BIOS Setup................................................................................... 24 Standard CMOS Setup ................................................................. 26 Advanced BIOS Features ..................................
BIOS SETUP BIOS Introduction The Award BIOS (Basic Input/Output System) installed in your computer system’s ROM supports Intel processors. The BIOS provides critical low-level support for a standard device such as disk drives, serial ports and parallel ports. It also adds virus and password protection as well as special support for detailed fine-tuning of the chipset controlling the entire system.
BIOS SETUP Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup PC Health Status Exit Without Saving ESC : Quit F10 : Save & Exit Setup Ç È Æ Å : Select Item Time, Date, Hard Disk Type… The section below the setup items of the Main Menu displ
BIOS SETUP Standard CMOS Setup “Standard CMOS Setup” choice allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the motherboard is already installed in a working system, you will not need to select this option. You will need to run the Standard CMOS option, however, if you change your system hardware configurations, the onboard battery fails, or the configuration stored in the CMOS memory was lost or damaged.
BIOS SETUP To set the date, highlight the “Date” field and use the PageUp/ PageDown or +/- keys to set the current time. Time The time format is: Hour : 00 to 23 Minute : 00 to 59 Second : 00 to 59 To set the time, highlight the “Time” field and use the / or +/- keys to set the current time. IDE Channel Master/Slave The onboard Serial ATA connectors provide Primary and Secondary channels for connecting up to four Serial ATA hard disks .
BIOS SETUP Drive A / Drive B These fields identify the types of floppy disk drive A or drive B that has been installed in the computer. The available specifications are: 360KB 1.2MB 720KB 1.44MB 2.88MB 5.25 in. 5.25 in. 3.5 in. 3.5 in. 3.5 in. Video This field selects the type of video display card installed in your system. You can choose the following video display cards: EGA/VGA For EGA, VGA, SEGA, SVGA or PGA monitor adapters. (default) CGA 40 Power up in 40 column mode.
BIOS SETUP Advanced BIOS Features This section allows you to configure and improve your system and allows you to set up some system features according to your preference.
BIOS SETUP Hyper-Threading Technology Hyper-Threading Technology enables two logical processors on a single physical processor by replicating, partitioning, and sharing the resources within the Intel NetBurst microarchitecture pipeline. Quick Power On Self Test When enabled, this field speeds up the Power On Self Test (POST) after the system is turned on. If it is set to Enabled, BIOS will skip some items.
BIOS SETUP Security Option This field allows you to limit access to the System and Setup. The default value is Setup. When you select System, the system prompts for the User Password every time you boot up. When you select Setup, the system always boots up and prompts for the Supervisor Password only when the Setup utility is called up. APIC Mode APIC stands for Advanced Programmable Interrupt Controller. The default setting is Enabled.
BIOS SETUP Advanced Chipset Features This Setup menu controls the configuration of the chipset.
BIOS SETUP Integrated Peripherals This section sets configurations for your hard disk and other integrated peripherals. The first screen shows three main items for user to select. Once an item selected, a submenu appears. Details follow.
BIOS SETUP IDE HDD Block Mode This field allows your hard disk controller to use the fast block mode to transfer data to and from your hard disk drive. IDE DMA Transfer Access This field, by default, is enabled OnChip Secondary PCI IDE This field, by default, is enabled IDE Primary/Secondary Master/Slave PIO These fields allow your system hard disk controller to work faster.
BIOS SETUP KB Power ON Password This field allows users to set the password when keyboard power on is the mode of the Power ON function. Hot Key Power ON This field sets certain keys, also known as hot keys, on the keyboard that can be used as a ‘switch’ to power on the system. Onboard Serial Port These fields allow you to select the onboard serial and parallel ports and their addresses.
BIOS SETUP Power Management Setup Phoenix - AwardBIOS CMOS Setup Utility Power Management Setup ACPI Function ACPI Suspend Power Management Off Method Video Off In Suspend Enabled S1(POS) User Define Video V/H SYNC+Blank Suspend Type Stop Grant Modem Use IRQ Suspend Mode HDD Power Down Soft-Off by PWR-BTTN CPU THRM-Throttling Resume by Alarm Date (of Month) Alarm Time (hh:mm:ss) Alarm 3 Disabled Disabled Instant-Off 50.
BIOS SETUP Video Off In Suspend When enabled, the video is off in suspend mode. Suspend Type The default setting for the Suspend Type field is Stop Grant. Modem Use IRQ This field sets the IRQ used by the Modem. By default, the setting is 3. Suspend Mode When enabled, and after the set time of system inactivity, all devices except the CPU will be shut off.
BIOS SETUP PNP/PCI Configurations This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value.
BIOS SETUP PC Health Status Phoenix - AwardBIOS CMOS Setup Utility PC Health Status Shutdown Temperature CPU Warning Temperature Current System Temp Current CPU Temp CPU Fan Speed Power Fan Speed Vcore Disabled Disabled 32°C/89°F 39°C/102°F 4000 RPM 0 RPM 1.24 V 12 V 12.03 V 1.8 V 5 V 3.3 V 1.92 V 4.99 V 3.15 V VBAT (V) 3.13 V 5VSB(V) 5.
BIOS SETUP Frequency/Voltage Control Phoenix - AwardBIOS CMOS Setup Utility Frequency/Voltage Control Auto Detect PCI Clk Disabled Spread Spectrum Disabled ITEM HELP Menu Level > Auto Detect PCI Clk This field enables or disables the auto detection of the PCI clock. Spread Spectrum This field sets the value of the spread spectrum. The default setting is Disabled. This field is for CE testing use only.
BIOS SETUP Load Fail-Safe Defaults This option allows you to load the troubleshooting default values permanently stored in the BIOS ROM. These default settings are non-optimal and disable all high-performance features. Load Optimized Defaults This option allows you to load the default values to your system configuration. These default settings are optimal and enable all high performance features. Set Supervisor/User Password These two options set the system password.
BIOS SETUP 2nd SuperIO Device The 2nd SuperIO selection under the Integrated Peripherals will appear if the ID394-R daughter card is used on the motherboard.
BIOS SETUP Security Chip Configuration The Security Chip Configuration selection in the BIOS Utility will appear only if the ID395-R daughter card is used on the motherboard.
BIOS SETUP This page is intentionally left blank.
DRIVERS INSTALLATION Drivers Installation This section describes the installation procedures for software and drivers under the Windows 2000 and Windows XP. The software and drivers are included with the board. If you find the items missing, please contact the vendor where you made the purchase. The contents of this section include the following: Intel Q965 Chipset Software Installation Utility............... 46 Intel Q965 Chipset Graphics Driver..................................
DRIVERS INSTALLATION Intel Q965 Chipset Software Installation Utility The Intel® Q965 Chipset Drivers should be installed first before the software drivers to enable Plug & Play INF support for Intel chipset components. Follow the instructions below to complete the installation under Windows 2000/XP. (Before installed Intel Chipset Software Installation Utility,Please update your system to Windows 2000 SP4 or Windows XP SP1A) 1. Insert the CD that comes with the board and the screen below would appear.
DRIVERS INSTALLATION 2. When the Welcome screen appears, click Next to continue. 3. Click Yes to accept the software license agreement and proceed with the installation process. 4. On the Readme Information screen, click Next to continue the installation. 5. The Setup process is now complete. Click Finish to restart the computer and for changes to take effect.
DRIVERS INSTALLATION Intel Q965 Chipset Graphics Driver Follow the instructions below to complete the installation under Windows 2000/XP. 1. Insert the CD that comes with the board and the screen below would appear. Click Intel (R) Q965 Chipset Drivers, then Intel (R) Q965 Chipset Family Graphics Driver. 2. When the Welcome screen appears, click Next to continue.
DRIVERS INSTALLATION 3. Click Yes to accept the software license agreement and proceed with the installation process. 4. On Readme File Information screen, click Next to continue. 5. On Setup Progress screen, click Next to continue the installation. 6. The Setup process is now complete. Click Finish to restart the computer and for changes to take effect.
DRIVERS INSTALLATION Realtek Codec Audio Driver Installation 1. Insert the CD that comes with the board and the screen below would appear. Click Intel (R) Q965 Chipset Drivers, then Realtek High Definition Codec Audio Driver. 2. When the Welcome screen appears, click Next to continue. 3. The Setup process is now complete. Restart the computer when prompted for changes to take effect.
DRIVERS INSTALLATION Intel LAN Drivers Installation Follow the steps below to start installing the Intel PCI Express Gigabit LAN drivers. 1. Insert the CD that comes with the board. On the initial screen, Click Intel (R) Q965 Chipset Drivers, then Intel(R) PRO LAN Network Drivers. 2. On the next screen, click Install Drivers to start the drivers installation.
DRIVERS INSTALLATION 3. When the Welcome screen appears, click Next to continue. 4. In the License Agreement screen, click I accept the terms in license agreement and Next to accept the software license agreement and proceed with the installation process. 5. When the Setup Type appears, click Complete and Next to continue. 6. When the Ready to Install the Program screen appears, click Install to continue. 7. The Setup process is now complete (InstallShield Wizard Completed).
DRIVERS INSTALLATION Follow the steps below to install the Marvell Gigabit LAN drivers. 1. Insert the CD that comes with the motherboard. Click LAN Card and then Marvell LAN Controller Drivers. 2. Click Next when the InstallShield Wizard welcome screen appears. 3. Click Next to agree with the license agreement. 4. Click Next when the Readme Information screen appears to proceed with the drives installation process. 5. When the Installation is complete, click Finish for the changes to take effect.
DRIVERS INSTALLATION This Page is Intentionally Left Blank.
APPENDIX Appendix A. I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses that also becomes the identity of the device. The following table lists the I/O port addresses used.
APPENDIX B. Interrupt Request Lines (IRQ) Peripheral devices use interrupt request lines to notify CPU for the service required. The following table shows the IRQ used by the devices on board.
APPENDIX C. Watchdog Timer Configuration The WDT is used to generate a variety of output signals after a user programmable count. The WDT is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock. Under these sorts of circumstances, the timer will count to zero and the selected outputs will be driven. Under normal circumstance, the user will restart the WDT at regular intervals before the timer counts to zero.
APPENDIX printf("System will reset after %d seconds\n", bTime); EnableWDT(bTime); return 0; } //======================================================================= void copyright(void) { printf("\n======== Winbond 83627EHF Watch Timer Tester (AUTO DETECT) ========\n"\ " Usage : W627E_WD reset_time\n"\ " Ex : W627E_WD 3 => reset system after 3 second\n"\ " W627E_WD 0 => disable watch dog timer\n"); } //======================================================================= void EnableWDT(int interval) {
APPENDIX //======================================================================= // // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR // PURPOSE. // //======================================================================= ==== #include "W627EHF.H" #include
APPENDIX Lock_W627EHF(); } //======================================================================= void Set_W627EHF_Reg( unsigned char REG, unsigned char DATA) { Unlock_W627EHF(); outportb(W627EHF_INDEX_PORT, REG); outportb(W627EHF_DATA_PORT, DATA); Lock_W627EHF(); } //======================================================================= unsigned char Get_W627EHF_Reg(unsigned char REG) { unsigned char Result; Unlock_W627EHF(); outportb(W627EHF_INDEX_PORT, REG); Result = inportb(W627EHF_DATA_PORT); Lock_
APPENDIX File of the Main.cpp //===================================================================== // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR // PURPOSE. //===================================================================== #include #include #include #include #include "W627HF.
CONTACT INFORMATION Any advice or comments about our products and service, or anything we can help you with please don’t hesitate to contact with us. We will do our best to support you for your products, projects and business. Global American Inc. 62 Address: 17 Hampshire Drive Hudson, NH 03051 TEL: Toll Free (U.S. Only) 800-833-8999 (603)886-3900 FAX: (603)886-4545 Website: http://www.globalamericaninc.com E-Mail: salesinfo@globalamericaninc.
