User Guide

iTach WiFi Quick Start
Global Caché is doing our part to
lessen our carbon footprint by pro-
viding recyclable packaging and
reducing our paper output.
For complete documentation and
tutorials, visit:
www.globalcache.com/docs
Getting Started. Initially, or when de-
fauulted, iTach WiFi units are an unse-
cured adhoc device discoverable with any
wireless Windows 8 or earlier laptop, Ap-
ple Mac, or iOS device. To use Windows
8.1 or later, please visit our support portal at
http://www.globalcache.com/support.
After applying power, view avail-
able wireless networks and select
iTachMACID. Your iTach is named with its
unique MAC ID, which is printed on the bottom
label. For example, if the MAC ID is 000C1E-
01B45C, the wireless network name will be
iTach000C1E01B45C.
Once the connection is established, open a
browser and enter http://169.254.1.70 into
the address bar. is is the default IP address
for the iTach. Select the iTach Network page,
and if prompted for a password, enter noth-
ing and press OK. Change the network Type
to Infrastructure and enter the SSID, Secu-
rity Type, and Passphrase of your network. In
order for your iTach unit to connect properly,
the router and iTach entries must be identical.
At this point, either enter a static IP or enable
DHCP and press Apply. Once your iTach has
reset, disconnect from your adhoc connection
and reconnect to your infrastructure network.
iTach units require up to 30 seconds to connect
to a 2.4 Ghz 802.11b network once settings
are changed. e power LED will blink one
time per second once connected.