TCL 100 User Guide
Contents Analog Alarm Clock Features........ 3 Clock Functions .............................. 9 Cordless Vibration Pad Features .. 4 Help and Support ......................... 12 Important Safety Instructions ...... 5 Troubleshooting Guide ................ 12 Included Equipment ....................... 6 Maintenance and Warranty ......... 13 Set Up .............................................. 6 Technical Details........................... 15 LED Display Notification ................
Clock Features TCL 100 Analog Alarm Clock Features 11 1 Snooze button/ 22 3 3 3 Alarm ON/OFF Alarm light/ incoming call light/Stop alarm 2 LED: Power ON/ OFF/Battery ON/OFF 4 Volume control 5 Set one of 5 44 acoustic signals 5 5 6 Pitch 66 7 Vibration and 77 88 15 15 9 9 14 14 10 10 Acoustics 8 Flashing lamp ON/OFF 9 Snooze delay 10 Clock 11 11 16 16 3 13 13 illumination 11 Telephone line socket 12 Power adapter socket 13 Vibration pad socket 14 Set alarm time 15 Set time 16 Batte
Clock Features TCL100 Cordless Vibration Pad Features 1 LED: Alarm ON/ OFF/Battery charge low 1 2 Vibration pad ON/OFF 22 3 Battery compartment 4 Screws 33 for battery compartment 5 Connection cable socket 44 55 4 Service Center
Getting started Getting Started — Included Equipment • • • • • 1 Analog Alarm Clock 1 Power Adapter 1 Vibration Pad 1 Connector Cable for Vibration Pad 2XAAA, 500mA Ni-MH Rechargable Battery for Alarm Clock • • • • 3XAAA, 800mA Ni-MH Rechargeable Battery Pack for Vibration Pad Telephone Cord Operating Instructions Battery Compartment Cover Set up 1. Connecting the alarm clock i. Insert the supplied batteries in the clock’s battery compartment.
Getting started Getting started LED Display Notification Alarm Clock Face The following functions are on the alarm clock face: Red: Alarm function is activated. Flashing Orange: Alarm function is activated, and battery charge is low. Vibration Pad The following functions are on the vibration pad: Flashing Green Every 2 Seconds: Vibration pad is on. Red: Vibration pad is charging. Flashing Red: Battery charge is low.
Clock functions Clock Functions Setting the clock Turn the set time rotary knob until the clock shows the correct time. Setting the alarm Turn the alarm time rotary knob until the clock shows the correct time for the alarm to trigger. Turning the alarm on/off Turn the alarm on/off rotary knob clockwise for On. Counterclockwise for Off. Setting the volume Caution: The volume/acoustic signal/pitch can only be modified if the alarm is on. If the alarm is off, those settings cannot be adjusted.
Clock functions Caution: Exposure to the alarm at full volume for a long period could cause ear damage. Selecting the acoustic signal Turn the acoustic signal rotary knob to required acoustic signal. Setting the pitch Turn the pitch rotary knob to set the pitch. It may be possible to detect higher or lower pitch tones even at low volumes. Setting the clock face illumination Slide the illumination switch to set clock face illumination.
Clock functions Setting the flashing light ON OFF Slide the switch to set the light in the snooze button to flash during an alarm. There are two settings available: (from left to right) On and Off. Setting the snooze delay 0m 5m 15m SNOOZE Slide the snooze delay switch to set the snooze delay. There are three settings available: (from left to right) 0 min, 5 min, or 15 min.
Help and support Help and support If you have problems with your device, please refer to the following information before calling for support. If you continue to have problems, please call the Service Center at 1-866-AMPLICOM (267-5426) for further assistance. Troubleshooting guide My clock does not work 1. The battery charge may be too low or no batteries have been inserted. 2. The clock may not be plugged in. My vibration pad does not work 1.
Maintenance and warranty Maintenance and Warranty Maintenance • • Please clean your equipment’s surfaces with a soft, lint-free cloth. Never use cleaning agents or solvents. Warranty AMPLICOM equipment is produced and tested according to the latest production methods. The implementation of carefully chosen materials and highly developed technologies ensure trouble free functioning and a long service life.
Maintenance and warranty If your equipment shows signs of defect during the period of warranty, please return to the sales outlet in which you purchased the AMPLICOM equipment together with the purchase receipt. All rights to claims under the terms of warranty in accordance with this agreement must be asserted exclusively with regard to your sales outlet. Two years after the purchase of our products, claims under the terms of warranty can no longer be asserted.
Technical details Technical details Alarm Clock Frequency Power supply Telephone plug Batteries Initial charging time Optimum ambient temperature Optimum storage temperature Transmission power Dimensions L / W / H Weight 433 MHz Input: 100-240 VAC, 50/60Hz Output: 12VDC, 670mA BS 6312 2 x AAA 1.2 V, 500 mAh, NiMH Up to 16 hrs 32˚F to 104˚F (0˚C to 40˚C) -4˚F to 140˚F (-20˚C to 60˚C) 10 dBm 5.2 x 5.8 x 3.3 in (132 x 146 x 84.6 mm) 12.3 - 13.
Questions? ¿Dudas? Amplicom USA Service Center 310 Ambrose Avenue Nashville, TN 37207 V/TTY: 1-866-AMPLICOM (267-5426) www.amplicomusa.
TCL200 User Guide
CLOCK FEATURES TCL200 Digital Alarm Clock Features Front View 1 Snooze button /Voice prompt /Incoming call light /Stop alarm 11 12 12 22 2 LED: Alarm 1 ON/OFF 1111 33 10 10 44 99 55 66 88 77 3 Alarm ON/OFF 4 LED: Alarm 2 ON/OFF 5 Repeat alarm signal 6 Increase value /Clock voice prompt 7 Decrease 8 Set weekday and time 9 Set alarm time and alarm activation period 10 LED: Alarm period, Monday to Friday ON/OFF 11 Display 12 LED: PM (for 12-hour clock)* *Only when English is selected valu
CLOCK FEATURES Back View 13 Volume control 13 13 14 Set one of 14 14 15 15 5 acoustic signals 15 Pitch 16 16 17 17 22 Vibration pad socket 23 Battery compartment 24 Set alarm period 16 Vibration and Acoustics 17 Flashing lamp 18 18 19 19 24 24 ON/OFF 18 Snooze delay 19 Dimmer ON/ OFF 20 20 20 Telephone line socket 21 21 23 23 4 22 22 21 Power adapter socket Service Center
VIBRATION PAD FEATURES TCL200 Cordless Vibration Pad Features 1 LED: Alarm ON/ OFF/Battery charge low 1 2 Vibration pad ON/OFF 22 3 Battery compartment 4 Screws 33 for battery compartment 5 Connection cable socket 44 55 1-866-AMPLICOM (267-5426) 5
GETTING STARTED Getting Started — Included Equipment • • • • • 1 Digital Alarm Clock 1 Power Adapter 1 Vibration Pad 1 Connector Cable for Vibration Pad 2XAAA, 500mA Ni-MH Rechargable Battery for Alarm Clock • • • • 3XAAA, 800mA Ni-MH Rechargable Battery Pack for Vibration Pad Telephone Cord Operating Instructions Battery Compartment Cover Setup Connecting the alarm clock 1. Insert the supplied batteries in the clock’s battery compartment.
GETTING STARTED 2. To change the language, hold down the select language button for 10 seconds. The alarm clock will announce the time and weekday — in the next language. 3. The languages will change in the following order: German, French, Italian, Spanish, and English. Set the weekday and time 1. Press the Set Weekday and Time button for 5 seconds. The alarm will announce the weekday currently set. 2. Use the Increase/Decrease Value buttons as needed to set the current weekday.
GETTING STARTED 5. Use the Increase/Decrease Value buttons as needed to set the current minute, and then press the Set Weekday and Time button. The alarm clock will announce the complete weekday and time setting. 6. Clock voice prompt on/off setting: Press and hold “+” button for 10 seconds. If the voice prompt is weekday and time, the setting will be on. If the voice prompt is two beeps, the setting is off. Setting the alarm time and period Important: There are two alarm period settings available.
GETTING STARTED 5. Press the Increase/Decrease Value button as needed to set the alarm period, and then press the Set Alarm Time button. The alarm clock will announce the complete alarm setting. The alarm volume/acoustic/pitch settings are available in case of the alarm on/off switch is ON and alarm period switch is setting to 1 or 2 but not period 1+2. LED Display Notification Vibration Pad The following functions are on the vibration pad: Flashing Green Every 2 Seconds: Vibration pad is on.
CLOCK FUNCTIONS Clock Functions Certain functions require entering test mode before setting. Turning the alarm on/off Turn the alarm on/off rotary knob clockwise for On. Counterclockwise for Off. Setting the volume Caution: The alarm and telephone ringer begin sounding at a low volume. The volume will then increase to the set maximum until the alarm is turned off or the telephone is answered. Turn the volume rotary knob to set the maximum volume for the alarm and telephone ringer.
CLOCK FUNCTIONS Selecting the acoustic signal Clock must be in Test Mode before selecting the acoustic signal. Turn the acoustic signal rotary knob to required acoustic signal. Setting the pitch Clock must be in Test Mode before setting the pitch. Turn the pitch rotary knob to set the pitch. It may be possible to detect higher or lower pitch tones even at low volumes. Setting the clock face dimmer Slide the dimmer switch to activate clock face dimmer.
CLOCK FUNCTIONS Selecting the alarm mode Slide the alarm mode switch to set the type of alarm. There are three settings available: (from left to right) vibration only, acoustic signal only or acoustic signal and vibration. MODE Setting the flashing light ON OFF Slide the switch to set the light in the snooze button to flash during an alarm. There are two settings available: (from left to right) On and Off. Setting the snooze delay 0m 5m 15m SNOOZE Slide the snooze delay switch to set the snooze delay.
CLOCK FUNCTIONS Activating the vibration pad After connecting the vibration pad, use the switch on the vibration pad to turn the vibration function on and off. There are two settings available: (from left to right) On and Off. Setting the alarm time and alarm period Press the set alarm time and alarm period button to set the alarm time and the active alarm period. Increase selection value Press the increase value button to increase the selected value in the display.
HELP AND SUPPORT Help and support If you have problems with your device, please refer to the following information before calling for support. If you continue to have problems, please call the Service Center at 1-866-AMPLICOM (267-5426) for further assistance. Troubleshooting guide My clock does not work 1. The battery charge may be too low or no batteries have been inserted. 2. The clock may not be plugged in. My vibration pad does not work 1.
MAINTENANCE AND WARRANTY Maintenance and Warranty Maintenance • • Please clean your equipment’s surfaces with a soft, lint-free cloth. Never use cleaning agents or solvents. Warranty AMPLICOM equipment is produced and tested according to the latest production methods. The implementation of carefully chosen materials and highly developed technologies ensure trouble free functioning and a long service life.
MAINTENANCE AND WARRANTY If your equipment shows signs of defect during the period of warranty, please return to the sales outlet in which you purchased the AMPLICOM equipment together with the purchase receipt. All rights to claims under the terms of warranty in accordance with this agreement must be asserted exclusively with regard to your sales outlet. Two years after the purchase of our products, claims under the terms of warranty can no longer be asserted.
TECHNICAL DETAILS Technical details Alarm Clock Frequency Power supply Batteries Initial charging time Optimum ambient temperature Optimum storage temperature Transmission power Dimensions L / W / H Weight 433 MHz Input:100-240 VAC, 50/60Hz Output: 12VDC, 670mA 2 x AAA 1.2 V, 500 mAh, NiMH Up to 16 hrs 32˚F to 104˚F (0˚C to 40˚C) -4˚F to 140˚F (-20˚C to 60˚C) 10 dBm 3.1 x 5.1 x 5.8 in (80 x 130 x 146 mm) 12.
Questions? ¿Dudas? Amplicom USA Service Center 3018 Ambrose Avenue Nashville, TN 37207 V/TTY: 1-866-AMPLICOM (267-5426) www.amplicomusa.
