User's Manual

Change PIN
1. Press and hold (located underneath the base) for two seconds. The
current 3 digit PIN will be announced and the  rst new digit requested. Enter
a digit between 0 and 9.
2.
or , the digits will also be shown on theSelect the new  rst digit using
base message counter. Press
to con rm.
3. Repeat the above procedure for the 2nd and 3rd new digits.
4. After the 3rd digit has been con rmed, the new PIN will be announced.
Press at any time to exit the Change PIN code mode and return to stand-
by. The PIN code will remain unchanged.
Call in to check messages
1. Dial the system’s phone number from a remote phone and wait until the
answering machine picks up the call.
2. Press
twice, then enter the 3 digit PIN after the voice prompt.
3. Refer to the next section, “Manage messages from another phone” for
additional instructions.
ANSWERING
MACHINE
Service Center
1
