User's Manual

Service Center

Connect and charge wrist shaker

Important: Use only the power adapter supplied, otherwise wrist shaker

may not work.

1. Plug in the charger unit

Plug the charger unit into the wall socket.

2. Place the wrist shaker in the

charger unit

Place wrist shaker on its charger unit, with

the two connection points facing down. A red light on the wrist shaker indicates

it is charging properly. Charge the wrist shaker for 10 hours before use.

Note: When fully charged, the wrist shaker’s battery will last  ve days. The

larger red light will  ash slowly when the battery is low and needs to charge

for 10 hours.

3. Switch wrist shaker on/off

Press and hold for  ve seconds, until the green light with the warning

triangle comes on.

GETTING STARTED