User's Manual

Service Center
64
USE ON A PRIVATE BRANCH EXCHANGE
4. Choose the desired recall timing setting (Short or Long) using or
and press .
Insert a dialing pause
Insert a pause before the dial tone if the system requires an outside line which
takes awhile to connect.
To insert a dialling pause using your corded phone, enter the number to reach
the outside line and then press
. A P on your display will show dialling
pause is active.
To insert a dialling pause using your cordless handset, enter the number to
reach the outside line and then press
for two seconds. A P on the display
will show dialing pause is active.
Note: A dialing pause can be used with a phone number in the phone book.
Set the dial mode
There is a choice of two dialing modes: tone and pulse. The default setting is
TONE and this is the correct setting for use within the United States.
To change dial mode using the corded phone
1. Press , then scroll using or to highlight Settings and press
.
USE ON A PRIVATE BRANCH EXCHANGE