BT 1000 USER GUIDE
About your speaker With the GDMALL BT1000 wireless speaker, you can listen to music from your compatible device, such as a phone or music player, and enjoy high-quality audio. A single speaker fills your room with music, and you can connect a second GDMALL BT1000 wireless speaker for stereo sound. You can connect to another device on the go, without stopping the music playing. The speaker also has a standard 3.5 mm audio connector. Read this user guide carefully before using the product.
1 Connect the charger to a wall outlet. 2 Connect the charger cable to the charger connector on the speaker. 3 When the battery is fully charged, first disconnect the charger from the speaker, then from the wall outlet. You can also use a compatible USB cable to charge the battery. Charging over USB can take longer to start and you may not be able to use the speaker immediately. Charging may not work if you connect through a non-powered USB hub.
The speaker remembers which channel it has been when paired with different speakers. When the speakers are paired, you can adjust the volume level / Play and Pause or switch both speakers off from either speaker. You can only pair and connect your device to the speaker that is the left channel. The speaker that is the right channel is not in the paired devices list in your phone. Connect to 3.5 mm audio You can also use a standard 3.5 mm audio cable to connect your device to the audio connector speaker.
Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.