Installation Guide

ITEM # : 22493

IMPORTAN

: TURN OFF THE POWER AT THE MAIN FUSE

OR CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION.

Carefully unpack and identify all parts before assembly.

1.Be sure the power to the installation point is off.

2.Pull the power supply wires out from the outlet box, and mount the Universal Crossbar to the

outlet box with Outlet Box Screw.

3.Attach the power supply wires to the fixture lead wires by connecting black to black,

and white to white. Attach the power supply ground wire from the outlet box and the fixture

ground wire from the fixture to the green ground screw on the mounting bracket or connect

both wires together using the correct size of wire connectors.

4.Align the Holes in the Blackplate with the Mounting Screw attached to the Universal Crossbar.

5.Pass the fixture over the Mounting Screw and secure against by threading

Mounting Balls onto end of Screw. Tighten until snug.

6.Place the Shade over the Socket and secure Shade to Socket with Counter Ring.

7.Refer to label on socket and install proper wattage bulb.(Not Included)

ASSEMBLY INSTRUCTIONS