Installation Guide

STYLE# 28598-1
Carefull
y
unpack all lamp parts from the carton.
1.Take the lamp carefully out of the carton ,and place it
on a flat surface.
2.Thread Part A onto the Base and clockwise to tighten .
3.Thread the Part B onto the Part A. Turn clockwise to tighten.
4. Thread the Part C onto the Part B.Turn clockwise to tighten.
5. Thread the Part D onto the Part C.Turn clockwise to tighten .
6.Thread the top of the central pipe onto the bottom of PartD.
8.Put the Finial Disk onto the Shade then tighten with Finial.
9. Use 3-WAY 150W TYPE A bulb (not included).
This portable lamp has a polarized plug ( one
blade is wider than the other ) as a safety
feature to reduce the risk of electric shock.
This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Never use with an extension cord unless plug can be fully inserted. Do not
attempt to defeat this safety feature.
INSTRUCTIONS
7. Place the Harp onto the Harp Base .
ASSEMBLY INSTRUCTIONS
IMPORTANT SAFETY