INSTALLATION / USER MANUAL CD15270TTX/24 G1500192-G1500195 15” High Brightness LCD monitor This technical literature is subject to change. Please contact NCR Display Engineering / GDS before designing product based on this information. This manual should be read in conjunction with Technical Specification SPE10282. This document and information herein is the property of Global Display Solutions Ltd. and all unauthorised use and reproduction is prohibited.
Contents FCC Notice (U.S. Only) .................................................................................................................. 3 Safety Instructions ........................................................................................................................... 4 Cleaning the LCD Colour Monitor.................................................................................................. 5 Controls ...........................................................................
FCC Notice (U.S. Only) FCC Class B – Applicable only to Limited Feature connections This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules.
Safety Instructions This model is a LCD display module for building into other equipment. It must be used for no other purpose. Read the Safety Instruction carefully and keep it for use later. Beware of all warning and instruction signs marked on the monitor. The monitor is designed as a display component for building into other equipment. It must be used for no other purpose. The chassis metalwork of the module must be properly bonded to the main earthing termination in Class I equipment.
Cleaning the LCD Colour Monitor 1. To clean the LCD panel: - Wipe the screen gently with a clean lens brush made of camel hair, or a soft, clean, lint free cloth. This is to remove dust and other particles without scratching the LCD panel. - If it is still not clean, then wipe with a damp lint free cloth and blow on it to dry. 2. Do not clean the panel with keton-type material (e.g. acetone), ethyl, toluene, ethyl acid, methyl, or chloride. These may damage the panel. 3.
On-Screen Display Menu Exit: Setup: Picture: This document and information herein is the property of Global Display Solutions Ltd. and all unauthorised use and reproduction is prohibited. Copyright © 2011 by Global Display Solutions Ltd, Yorkshire, UK. All rights reserved. Confidential, Unpublished Property of GDS (UK).
Colour: This document and information herein is the property of Global Display Solutions Ltd. and all unauthorised use and reproduction is prohibited. Copyright © 2011 by Global Display Solutions Ltd, Yorkshire, UK. All rights reserved. Confidential, Unpublished Property of GDS (UK).
OSD: This document and information herein is the property of Global Display Solutions Ltd. and all unauthorised use and reproduction is prohibited. Copyright © 2011 by Global Display Solutions Ltd, Yorkshire, UK. All rights reserved. Confidential, Unpublished Property of GDS (UK).
System After picture adjustments have been optimized, the settings are memorised automatically. The OSD menu will disappear after 10 seconds of inactivity (timeout adjustable through the OSD menu) or the OSD can be exited by selecting EXIT. • • Brightness: regulates the overall level of white light viewable on the screen. Contrast: controls the range between black and white of the image on the screen. This document and information herein is the property of Global Display Solutions Ltd.
Specifications LCD Panel: 15” NEC NL10276BC30-18C Brightness: 600 cd/m2 typical Contrast: 600/1 typical Active Display: Horizontal: Vertical: Video Signal: Analogue RGB (0.7Vp-p positive into 75Ω) Sync signal: Separate LVDS sync. Mechanical Dimensions: 348 (W) x 263 (H) x 44 (D) mm Weight: 3.0 Kg (maximum) Temperatures: Operating temp: Storage temp: 304.1mm 228.
Pin Assignments Signal - Analogue: 15 way HD VGA connector Pin 1 2 Function Red video Green video Pin 9 10 Function +5V supply (DDC) Sync ground 3 4 Blue video Monitor ID bit 2 11 12 Monitor ID bit 0 SDA (DDC data) 5 6 Ground Red video ground 13 14 Horizontal sync. Vertical sync.
Mechanical Drawings This document and information herein is the property of Global Display Solutions Ltd. and all unauthorised use and reproduction is prohibited. Copyright © 2011 by Global Display Solutions Ltd, Yorkshire, UK. All rights reserved. Confidential, Unpublished Property of GDS (UK).
Mechanical Drawings cont: This document and information herein is the property of Global Display Solutions Ltd. and all unauthorised use and reproduction is prohibited. Copyright © 2011 by Global Display Solutions Ltd, Yorkshire, UK. All rights reserved. Confidential, Unpublished Property of GDS (UK).