User's Manual

4
Charging the battery
Plug the charger connector into the phone.
Connect the charger to the electrical outlet.
The charge level icon will flash repeatedly at
the top right corner of the mobile phone’s
screen; if the mobile phone is charging while
power off, a charging indication will appear
on the screen. If the mobile phone was used
even after there was insufficient power, it
might take some time for the indication to
appear on the screen.
When the battery level icon indicates that
the battery is full and does not flash anymore,
disconnect the charger. This process usually
takes more 3-4 hours. The mobile phone and
charger will become warm during charging
and this is normal.
Attention:
Charging must be performed in a well-
ventilated area with a temperature between
-10˚C and +45˚C. The factory-supplied
charger must be used otherwise the warranty
shall be void.
Making a Call
After inserting a SIM card, you may dial and
receive calls on your phone when the symbol
of your network provider appears on the
screen. The information bar on the upper left
corner of the screen indicates network
strength (the signal is strongest when there
are five lines visible).Barriers greatly affect call
quality, thus slightly moving your location can
increase the quality of the phone call.
Use the number key to input number, and
then press the dial key to dial the call.
Call Options
The call option menu can only be seen while
a call is being made. Functions such as call
waiting, call divert, and conference calls
require network support, please contact your