User Manual

244241,244242 www.globalindustrial.com . 15 .

8. RS232/USB COMMUNICATIONS

8.1 RS-232 connection between the Scale and the Host:

Scale -----------------------Cable---------------------------Host

(DB9 female)-----(DB9 male)----(DB9 female)----(DB9 male)

PIN2 TXD 2 2 PIN2 RXD

PIN 3 RXD 3 3 PIN3 TXD

PIN 5 GND 5 5 PIN5 GND

PIN4 DSR 4 4 PIN4 DTR

PIN6 DTR 6 6 PIN6 DSR

PIN7 CTS 7 7 PIN7 RTS

PIN8 RTS 8 8 PIN8 CTS

PIN1 NC 1 1 PIN1 NC

PIN9 NC 9 9 PIN9

8.2 When Parameter P4.x in section 7 is set to 0 :

No RS232 and USB function. It will not transmit or receive any data although the scale is equipped with

RS232 or USB. The RS232 and USB function can be only activated when scale is in normal weighing

mode.

8.3 When Parameter P4.x in section 7 is set to 1 :

Output the current displayed data when the key is pressed, and it does not receive any data.

The output format is as below:

8.4 When Parameter P4.x in section 7 is set to 2 :

Output displayed gross, tare and net weight when the key is pressed, and it does not

receive any data. The output format is as below: