User Manual

244241,244242 www.globalindustrial.com . 19 .
9. ERROR MESSAGES
1. 0ˉ ˉ ˉ ˉ ˉ zero point is over the setting range
2. 0_ _ _ _ _ zero is below the setting range
3. Adˉ ˉ ˉˉ ADC is over max. range
4. Ad _ _ _ _ ADC is below min. range
5. - - - - - - overload
6. CAL.Er there is an error in calibration
7. Lo.bAt the voltage of batteries or input power is below 5.6V.
10. WARNING
 Do not dismantle the weighing machine without following the necessary instructions.
 Do not jump while standing on the platform. This may damage the sensor inside.
 Do not move the weighing machine violently and abruptly. It is recommended to move and
put down the weighing machine gently.
 It is suggested to wipe the stains with soft cloth soaked with detergent and to wipe later with
soft cloth too. Do not use organic solutions and boiled water to wipe the stains. Do not use
water for cleaning.
 Keep the weighing machine in a dry and clean environment. Do not expose it outdoor or use
it in locations near fire, under direct sunshine or with high temperature.