User Manual

1
MODEL # 641606
User's manual Manual del usuario Manuel de l'utilisateur
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
US: 1-800-645-2986
Service à la clientèle
Canada: 888-645-2986
4.
Peel the tape cover o the back of the
Bracket. Be sure to leave the tape itself on;
only peel the cover. See next page for how
to adhere bracket to each type of top.
For use with Global Industrial
Trash Cans model #:
Plastic Square Top:
641414BKT/BLT
Plastic Round Top:
240464GYDT
Flat Lid:
237726BKT/GNT
261800BLT
261940BKT/GNT
261942BLT
261958BLT
261924BKT/RDT/GYT/GNT/BLT
Rain Bonnet:
261850BLT
260804BKT/GNT
261941BKT/GNT
261943BLT
261960BLT
261926BKT/RDT/GYT/GNT/BLT
1.
Activate your Trash Talk Sensor using a smart
phone.
Follow the instructions on the Activation Flyer
to successfully activate your device.
NOTE:
The Sensor must be activated on-site where
it will be installed. During the activation
process, the location will be recorded.
2.
Dierent Model Numbers require the
Bracket to be closed at dierent angles. To
set the bracket at an angle, push the top of
the bracket down until the holes on the top
align with the holes in the back that corres-
pond with the required angle, as shown in
the diagram. Insert the supplied Screws
and Washers into appropriate threaded
holes
15°
5°
15°
Flat Top
Rain Bonnet Top
5°
Plastic Square Top
Plastic Round Top
Required Angles for
each type of top
3.
On the side that has six holes, use
the screws and washers to attach the
Sensor to the Bracket. Use only the
holes in the middle row. Be sure to
attach the side with the sensor close
to the back of the bracket, where the
fastener is. Follow the diagrams.
For Flat and Rain Bonnet Tops
For Plastic Square and Round Tops
Model: 641606
Global Industrial; Closed Loop Bracket for
TrashTalk™ Enabled Trash Cans