Assembly Instructions

Page 2

Three Wide Locker Assembly Instructions Customer Service 1-800-645-2986

• 18" deep, single-tier lockers include

both a coat rod and back and side

hooks

• 12” and 15" deep single and

double-tier lockers include back,

side and top double prong hooks

• Six-tier models do not include coat

rods or hooks

Bolt on hooks and/or coat rod

Insert rear legs in each end of locker. Bolt each leg in two places. Rear legs must be a

maximum of 36” apart. Attach additional legs as required.

Attach Door Frame Assembly. Leave

top, center and bottom bolts out

if attaching to additional

lockers.

Slide Leg through bottom

Bolt locker foot to leg. Stand

locker in place. Level them and

adjust rear legs to touch floor

and tighten bolts. Floor anchor

not included. Bolt banks of

lockers together using holes

omitted in step #5.

Anchor individual lockers using

locker foot on all four legs. For banks

of lockers, anchor extreme ends plus

intermediate lockers on 36” centers maximum.

Leg

Locker

Foot

Coat Rod

Double Prong Hook Bolts to

Bottom Of Top or Shelf

Side Hook & Back Hook

WARNING:

–FLOOR ANCHOR MUST HAVE A MINIMUM

PULL-OUT VALUE OF 190 LBS.

–WALL ANCHOR MUST HAVE A MINIMUM

PULL-OUT VALUE OF 150 LBS.

8. Punching Patterns

60” Sides & Backs 72” Sides & Backs

S.T. = Single Tier

D.T. = Double Tier

Bolt

here