User Manual

THANK YOU FOR USING THIS HIGH LIFT HAND TRUCK. FOR

YOUR SAFETY AND CORRECT OPERATION, PLEASE CAREFULLY

READ THIS INSTRUCTION BEFORE USING IT.

NOTE: All of the information reported herein is based on data

available at the moment of printing. The factory reserves the right to

modify its own products at any moment without notice and incurring in

any sanction. So it is suggested to always verify possible updates.

1. SPECIFICATIONS

Model

HSP1-520 HSP1-680 HSP11/2-520 HSP11/2-680

Rated lifting capacity 1000 kgs 1500 kgs

Max. Fork height 800 mm 800 mm

Min. Fork height 85 ±2 mm 85 ±2 mm

Fork length 1140 mm 1100 mm

Fork width (outside) 520 mm 680 mm 520 mm 680 mm

Fork width (inside) 196 mm 356 mm 196 mm 356 mm

Lifting speed 9 mm/stroke

Descending speed ∠0.1 mm/second

N.W. 105 kgs 112 kgs 118 kgs 125 kgs

2. SAFETY INSTRUCTIONS

1. The truck shall be used in accordance with instructions handbook.

2. Don’t put the hand & foot under the fork at any time.

3. Don’t work on the slope surface.

4. Quick lifting is prohibited for loads of more than 300 kgs. Any

manipulation of the pressure relief valve is strictly prohibited. All

assembling, adjusting and maintenance shall only be done by

industrial mechanics trained people. These people must be familiar

with all safety regulations of European and national where the item is

in use relating to the operation and maintenance of pedestrian

controlled industrial trucks.

5. Load should be put on the fork center. Side-load is strictly prohibited.

6. The truck shall not be used to transport persons.

7. It is recommended to the driver to wear security shoes.

8. No modifications shall be carried out which adversely affect the

compliance of the truck with prEN 1757-4.