User Manual

3. INSTALLATION & ADJUSTMENT
1. Screw(part No.158)
● To prevent oil-leaking from oil tank during transportation, Air Screw
(part No.158) is replaced with Oil-sealing Screw in the factory. But it
has to be replaced back when you put this truck in use.
● How to change: Screw out Oil-sealing Screw, then screw in Air
Screw With which the Pump housing(No.160) is hung, thus keep oil
tank always connecting with atmosphere.
2. Handle
During transportation, the handle is disassembled from the truck and
packed separately. It has to be assembled back and adjusted
properly and carefully before use.
A Handle installation
:
● Take 3 pieces of M10 Nut (No.185) & Spring washer from spare parts
bag. Select handle to match the truck with the same fitting
numbers.
● Assemble the handle on the Handle Base (No.181) with 3 pieces of
M10 Nut & Spring Washer tightly.
● Put the chain’s Eye Bolt (No.110) in the slot at the front end of
Pendulum Arm (No.112).
B Handle adjustment
● There are 3 different positions with different functions for the Release
Lever (part No.106). See picture 1
4