User Manual

Position I: Quick lifting for fork.
Position II: Slow lifting for fork.
Position III: Descending for fork.
● Test different functions by putting the Release
Lever in 3 different positions respectively.
If it does not function properly, then adjusting
Lock Nut (No.113) by following process. See picture 2
Problems Turning direction of Lock Nut
Fork not lifted up – (counter-clockwise)
Fork not lowering down + (clockwise)
Slow lifting no function + (clockwise)
Quick lifting no function – (counter-clockwise)
● Function of Adjusting Screw (No.187) for Release Lever (see
picture 1)
To fix release lever (No.106) into its 3 positions properly by adjusting
the screw, you can adjust the operating force of the release lever.
To prevent accidental touch of the Release Lever which could cause
sudden sliding down of the fork. You can tighten the Screw (No.187)
in the position I or II of the Release Lever (No.106).
See picture 1
● How to release the air from the pump.
5