User Manual

1. Unplug machine right after cleaning.
2. Tilt machine back and remove pad driver or brush.
3. Clean the outside of the machine with a mild cleaner.
4. Check power cord for any damage. If damage is detected, cord must
be replaced immediately by authorized personnel.
5. Lubricate wheels with a water resistant lubricant once a month.
6. Check machine for loose or missing nuts and bolts, and replace
asnecessary.
7. If the machine is used in a dusty environment, you may remove the
motor cover and blow the motor clean with compressed air. This will
ensure proper ventilation, and allow the motor to run cooler.
8. For Model #641311, remove the dust collector and vacuum or
replace it.