User Manual

Forklift Blue Arrow Light - Standard
Models
800503 & 800505
Technical Specifications:
• [LED] 2PCS Cree high power LEDs, 3W/LED
• Power: 6W
• Lux strength: 400LUX
• Voltage: 10～80V DC
• Color: Blue
• Life Time: >50000 Hours
• Working Temperature: -49 ~185°F
• Double insulated silicon rubberized wire, can bear very low&high temperature
• Reverse polarity protected
• Certificate: IP68, CE, ROHS
CAUTION: Follow safety precautions below prior to installation and use. Failure to
observe instructions could result in item damage, severe personal injury, and/or
property damage. For additional questions or concerns, contact Global Industrial
Customer Service at 1-800-645-2986 or visit www.globalindustrial.com.
• To properly install this work light, you must have good understanding of
automotive electrical procedures and systems, along with proficiency in the
installation and use of safety warning equipment.
• When drilling into a vehicle structure, be sure that both sides of the surface are
clear of anything that could be damaged.
• DO NOT install equipment or route wiring or cord in the deployment path of an
air bag.
• You should frequently inspect the light to ensure that it is operating properly.
• This product contains high intensity LED devices. To prevent eyes damage, DO
NOT stare into the light beam at close range.
• Connect light wire to vehicle battery, black wire connect to negative pole, Red
wire connect to positive pole.
• Must fit a switch on the wire. Otherwise, the light will remain on.