User Manual

1
Power Scissor Lift Table Model 989018, 989034, 989035, 989036, 989037
Note: This Manual has been prepared for skilled and
competent personnel. It provides instructions for using the
product correctly and parts list. This Manual cannot replace
the professional skills and expertise of the user.
I. WARNING!
If operating the li table improperly, a person may be seriously
injured. erefore, operate properly according to the following
instruction
• Read & thoroughly understand the Instruction Manual
completely before using. Follow all safety instructions
strictly.
• It is necessary to check all safety devices before operation.
• Make sure that there are no obstacles in the working area.
• Do not put a foot or hand in scissors mechanism or
through the frame.
• Engage the maintenance bars before working on the lift
table. See part VII
• Do not overload the lift table. The load should be distrib-
uted on the table according to relevant load distribution
chart.
• Pay attention if local voltage and frequency are the same
as the input specification of the lift table.
• Use the lift table on flat and solid ground.
• All the electrical connection and disconnection
operations must be carried out by skilled and competent
personnel.
• While in operation, it is forbidden to contact the moving
parts of the lift table.
•
Do not lift or lower the load, if it is unstable or otherwise
could harm a person or other object.
• It is forbidden to lift the load, which perhaps does harm
to a person or other object.
• It is forbidden to operate the lift table while a person is
under the table.
• Do not adjust the safety valve of the hydraulic power
pack.
• It is forbidden to operate the lift table, if there is any
small structure distortion.
• Do not use in an explosive or flammable place.
II. CAUTION!
If operating the lift table improperly, a person may be
injured. Therefore, operate properly according to the
following instruction.
• The lift table is a movable lifter designed to lift or lower
rated load. Do not use it for other purposes.
• It is forbidden to alter the lift table without
manufacturer’s written permission.
• It is necessary to use the replacement parts designated
by manufacturer.
• Make sure to keep some distance between the table and
ambient objects enough to operate the lift table safely.
• Keep the hydraulic system in clean and safe condition.
• The hydraulic power pack features an electric lowering
control. The coils must be fed with the required voltage
as described on those coils. The power supply voltage
should not exceed ±10% of the rated required voltage.
• Always do maintenance and routine checks while the
li table is unloaded.
• The lift table is not waterproof and should be used in a
dry environment.