User's Manual

ManualsBrandsGlobal Link ManualsElectronics22 CH Combination FRS/ GMRS Transceiver

1. Installing the battery will automatically turn-on the unit and proceeds to Watch Mode.

2. Enter to COMMUNICATOR Mode by pressing and holding the Power key for around 3 seconds. To exit

COMMUNICATOR Mode, press the Power key for around 3 seconds while on COMMUNICATOR mode.

2. Check the battery condition on the display.

3. Adjust the volume to a comfortable level by pressing the UP or DOWN key (default).

Navigating through the Menu

To access the advance feature of the M4X, your COMMUNICATOR has a Menu two (2) function:

Watch Mode (Default)

COMMUNICATOR Mode

WATCH Mode

1. Your COMMUNICATOR will automatically go to Watch Mode once the battery is installed, only the watch segments and

icons will be displayed on the LCD during this mode. Press the Menu key briefly to enter the Time Setting Mode; a

short keybeep tone will be locally generated when the Time Setting mode is engaged.

2. Additional presses of the Menu key for no longer than 1 second will advance you through the menu until exiting to

Watch mode. A s hort keybeep tone is generated at each key press

3. Menu mode exits to standby mode when the Menu key is pressed while the final menu selection is active.

4. The unit automatically times out of Menu mode and enters Watch mode in 10 seconds.

COMMUNICATOR MODE

1. To enter or exit to COMMUNICATOR Mode, press the Power key for around 3 seconds. A long keybeep tone is locally

generated (after a short keybeep tone) when the unit goes into COMMUNICATOR Mode and the LCD will display the

segments and icons for the COMMUNICATOR.

2. To enter the Menu Mode, press the Menu key briefly. A keybeep will be locally generated when the Menu Mode is

engaged.

3. Additional presses of the Menu key for no longer than 1 second will advance you through the menu until exiting to

COMMUNICATOR mode. A short keybeep tone is generated at each key press.

4. Menu mode exits to standby mode when the Menu key is pressed while the final menu selection is active.

5. Menu mode will automatically time out to standby mode 10 seconds after the last user programming is pressed.

6. Menu mode can be autoamtically cancelled by pressing PTT/Call key.

To set the Time

Your M4X COMMUNICATOR has a 12-hour (AM/PM) Time Clock, which can be set as follows:

1. In Watch mode, enter to Menu mode by pressing the Menu key briefly until a short keybeep tone is heard. When the

Setting mode is engaged, the Hour segment in the LCD Display will flash.

2. Press the Up or Down key to increase or decrease the Hour number displayed, a short keybeep tone is generated at

each key press. The Time Setting will cycle within 12hour am and 12hour pm. To engage auto-repeat, press and hold

the Up or Down key.

3. Advance thru the Menu by pressing the Menu key briefly until the Minutes segment is flashing. A short keybeep tone

will be generated.

4. Press the Up or Down key to increase or decrease the Minutes number displayed. A short keybeep tone is generated

at each key press. To engage auto-repeat, press and hold the Up or Down key.

5. Exit the Menu mode to return to “normal” mode by pressing the Menu key briefly or by automatic time out for about 10

seconds after last key is pressed.

USING THE COMMUNICATOR

Channel

Hours (Watch) Minutes (Watch)

1~22

12hr am/ 12hr pm

0~59

VOX

On/Off