INSTRUCTION MANUAL 2400W Blower Vacuum • Melbourne • Perth • Auckland • Hong Kong • Shanghai • Taipei • New York • Verona • London • Paris BV2400 050119 ED06 SP
Contents Introduction 3 Full 2 Years Home Use Warranty Environmental protection 3 Description of symbols 3 Specifications 3 Safety instructions 4 Additional safety rules for blower vacs 5 Know your product 7 Unpacking 8 Fitting the collection bag 8 Operation of the blower vac 8 To select the blow operation 8 To select the vacuum operation 9 Important notes when using the blower/vacuum selector lever 9 To empty the collection bag 9 Tips for using your blower vac 9 Whilst every
Description of symbols Dear Customer The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use. If you require any help with your product, whether it is a Warranty claim, spare part or user information, please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or 0800 445 721 in New Zealand. Wear eye protection. Wear hearing protection. Wear breathing protection.
Safety instructions Personal safety WARNING. Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Save these instructions Work area • Stay alert, watch what you are doing and use common sense when operating a power tool.
Additional safety rules for blower vacs • Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. • Always wear adequate protective clothing when operating the tool to avoid injuries to face, eyes, hands, feet, head or hearing. Use safety glasses or a face shield, high boots or sturdy shoes, long trousers, work gloves, a hard hat and ear defenders.
• Do not switch on the tool in enclosed or poorly ventilated spaces or in the presence of inflammable and/or explosive substances such as liquids, gasses and powders. • Do not get distracted and always concentrate on what you are doing. Use common sense. Never operate the tool when you are tired, sick or under the influence of alcohol or other drugs. • Do not operate this appliance with long loose hair or loose fitting jewellery. Tie long loose hair back and remove loose fitting jewellery.
1 Know your product 1. Trigger switch 2. Blower/vacuum selector lever 3. Rubber grip handle 4. Auxiliary handle 5. Collection bag 6. Housing 7.
Unpacking Operation of the blower vac Due to modern mass production techniques, it is unlikely that your power tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury. Prior to using the blower vac, ensure you have read and understood this instruction manual.
To empty the collection bag lower cavity below the blow/vac tube. Ensure when the blow operation is selected the blower vac is pointed, directed and used in a safe manner. Do not direct the air flow from this blower vac directly or indirectly towards another person. The collection bag is attached to the blower vac in 2 places. It is not necessary to remove the collection bag from the blower vac when the bag needs to be emptied. • The rear of the bag is fitted with a full length zip.
Maintenance and storage information Power Cord Maintenance Prior to cleaning or any maintenance, always ensure the power plug has been removed from the electrical power supply. When you have finished using the blower vac, always check to make sure the product is clean and free of dirt and debris. This is important around the selector lever flap which is just inside the round outlet. To check this area, remove the collection bag and ensure this area inside the outlet tube is free of debris and dirt.
Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: With continuing product development changes may have occurred which render the product received slightly different to that shown in this instruction manual.