- GMC 2300W 235mm (9-1/4") Circular Saw with Laser Line Generator Instruction Manual LS236LS

1. Keep the tool’s air vents unclogged and clean at all times.
2. Remove dust and dirt regularly. Cleaning is best done
with a soft rag or a soft brush. Wear safety glasses to
protect your eyes while cleaning.
3. Re-lubricate all moving parts at regular intervals.
4. If the body of the saw needs cleaning, wipe it with a soft
damp cloth. A mild detergent can be used but nothing
like alcohol, petrol or other cleaning agent.
5. Never use caustic agents to clean plastic parts.
CAUTION. Water must never come into contact with
the saw.
General inspection
Regularly check that all the fixing screws are tight. They
may vibrate loose over time.
Only an authorised service centre should replace the cordset
or effect other repairs. If the supply cord needs replacing,
the task must be carried out by the manufacturer, the
manufacturer’s agent, or an authorised service centre in
order to avoid a safety hazard.