315 0-25V/5A, AC/DC POWER SUPPLY Instruction Manual Revision: 11/2010
1315 0-25V/5A, AC/DC POWER SUPPLY Instruction Manual M-00249 EDITION : 2 ( DEC., 2001 ) Global Specialties,LLC 22820 Savi Ranch Parkway Yorba linda,CA 92887 WWW.globalspecialties.
TABLE OF CONTENTS SECTION PARTICULARS PAGE NO.
SECTION - 1 GENERAL INFORMATION DESCRIPTION : This simple power source is designed specifically for use in educational institutions. It can be used to demonstrate the concept of alternating and non-alternating voltages. It can also be used for simple experiments using lamps, resistances, etc.
PCB Components ======================================================================= Ref Designator Value ======================================================================= SWITCHES SW1 ON / OFF SWITCH 10A, 125V, DPST, ILLUMINATED ( T125 ARCOLECTRIC ) SW2 TOGGLE SWITCH 5A, 250V SECTION - 2 INSTALLATION INITIAL INSPECTION : As soon as the 1315 variable AC/DC source is unpacked, inspect for any damages that may have occured during transit. Save all packing material until inspection is complete.
SECTION - 4 PART LIST SECTION - 3 OPERATING INSTRUCTIONS a) 1315 as AC supply : Set output voltage to 0V by turning the variable control to minimum position ( Anti Clockwise ). PCB Components ======================================================================= Ref Designator Value ======================================================================= Set Power ON switch to apply input power. Adjust the voltage control to obtain the required output voltage at the Blue Terminals.