Owner manual

ManualsBrandsGlobal Specialties ManualsPower suppliers1315D - Manual

1315D

0-25V/5A, AC/DC

POWER SUPPLY

Instruction Manual

GLGL

OBOB

AL SPECIALAL SPECIAL

AL SPECIAL

TIESTIES

TIES

Global Specialties,LLC

22820 Savi Ranch Parkway

Yorba linda,CA 92887

WWW.globalspecialties.com



M-00458 EDITION : 1 ( JULY, 2012 )

Summary of content (5 pages)

PAGE 1
315D 0-25V/5A, AC/DC POWER SUPPLY Instruction Manual  GL OB AL SPECIAL TIES GLOB OBAL SPECIALTIES M-00458 EDITION : 1 ( JULY, 2012 ) Global Specialties,LLC 22820 Savi Ranch Parkway Yorba linda,CA 92887 WWW.globalspecialties.
PAGE 2
& Know your Power Supply read the Manual prior to Operation. TABLE OF CONTENTS SECTION PARTICULARS PAGE NO. 1 GENERAL INFORMATION 1 2 INSTALLATION 2 3 OPERATING INSTRUCTIONS 3 4 PART LIST 4 ! CAUTION NOTE This power supply has been designed and tested in accordance with the safety requirements for electrical equipment for measurement,control and laboratory use.
PAGE 3
SECTION - 1 GENERAL INFORMATION DESCRIPTION : This simple AC/DC power source is designed specifically for use in educational institutions. It can be used to demonstrate the concept of alternating and non-alternating voltages. It can also be used for simple experiments using lamps, resistances, etc.
PAGE 4
PCB Components Z 2505/AC-(SPL) 0205 ======================================================================= Ref Designator Value ======================================================================= CAPACITORS C1 1µF, 50V, ELE C2 1µF, 50V, ELE C3 0.1µF, 50V, CD C4 47µF, 50V, ELE C4* 0.1µF, 50V, CD C5 10µF, 50V, ELE C6 470µF, 30V, ELE C7 10µF, 50V, ELE C8 0.1µF, 50V, CD C9 0.1µF, 50V, CD C10 220µF, 30V, ELE C10* 0.1µF, 50V, CD C11 10µF, 50V, ELE C12 0.
PAGE 5
SECTION - 4 PART LIST SECTION - 3 OPERATING INSTRUCTIONS a) 1315D as AC supply : Set output voltage to 0V by turning the variable control to minimum position ( Anti Clockwise ). Set Power ON switch to apply input power. Adjust the voltage control to obtain the required output voltage. The variable control is a coarse control to adjust the output voltage with in 0-30V Connect the load at the AC output. The output voltage will be 25V after connecting 5A Load.