2001A 200KHz Function Generator Instruction Manual
WARRANTY Global Specialties certifies that all products manufactured conform to published specifications and are free from defects in materials and workmanship for a period of Three (3) years from the date of delivery when used under normal operating conditions and within the service conditions for which they were furnished.
Contents Section Description Section 1 General Description Page No. 1 GENERAL DESCRIPTION 1 1.1 Introduction 1 1.2 Applications 1 1.3 Specifications 1 1.4 Accessories 2 2 INSTALLATION 3 2.1 Inspection 3 2.2 Power Requirements 3 2.3 Safety Considerations 3 3 OPERATION 4 3.1 Front Panel Controls 4 3.2 Rear Panel Controls 5 3.3 Precautions 6 3.4 Operating Procedure 6 4 MAINTENANCE 8 4.1 Maintenance 8 4.
Level Ranges : Sine wave Distortion : Squarewave : Triangle Linearity Sweep Input Sweep Range : : : Input Impedance : GENERAL Power Consumption Dimensions (mm) : : : Weight 1.4 ACCESSORIES 1. BNC to BNC 2. Operation Manual 3. Power Cord : 1mV - 10mV p-p, 10mV - 100mV p-p, 100mV - 1V p-p & 1V p-p - 10V p-p. <2% upto 100KHz (<1% typical) <3% above 100KHz. Time symmetry : ±1.5% (typical <1%) Rise/Fall Time : <100ns (into 600 ohms +20pf). Better than 1%. 0 to +10V DC. 100:1 approx.
Section 3 Operation 3.1 6. LEVEL FINE This is a continuously variable level control with approx. 20dB range. 7. DC OFFSET Zero when feature not selected, ±5V DC into open circuit when selected. FRONT PANEL CONTROLS The front panel controls are functionally grouped and clearly designated for ease of operation. Their functions are described below : 8. TTL OUT CONNECTOR Square wave output (TTL) is available at this connector. The TTL signal is in phase with function output. 1.
3. MAINS SELECTOR This switch select the mains input as either 115V or 230V. Factory set to 115V. 4. MAINS IN This is the AC mains input to the Function Generator. Power input required is 115V ±10%, 60Hz or 230V ±10%, 50Hz. 5. EARTH TERMINAL This terminal for connection of external earth to the instrument. 3.
Section 4 Maintenance 4.1 Section 5 Circuit Diagrams MAINTENANCE The instrument has a rugged mechanical construction and will withstand normal handling and wear easily. As such, the unit needs very little maintenance. The unit may be cleaned with a soft dry cloth. No solvents should be used to clean the unit. While operating the unit, make sure that air circulation around the unit is not obstructed and the slits for ventilation are not closed.
Fig. 5.2 Osc. & Function Generator Circuit Fig. 5.3 100KHz Function Generator Output Amp.
Fig. 5.4 Sine to Square Convertor Circuit Fig. 5.
Section 6 Manual Changes 14
SERVICE AND WARRANTY INFORMATION For up-to-date product information, please visit www.globalspecialties.com. For instructions on how to obtain a return merchandise authorization number (RMA), please visit our website, or call our customer service department. GLOBAL SPECIALTIES 22820 Savi Ranch Parkway Yorba Linda, CA 92887 800-572-1028 globalspecialties.com Global Specialties will service and repair this instrument free of charge for a period of 3 full years, subject to the warranty conditions below.
