User's Manual
Table Of Contents
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- An Ad-Hoc wireless LAN is a group of computers, each equipped with one GL-241101 adapter, connected as an independent wireless LAN. Computers in a specific Ad-Hoc wireless LAN must be configured to share the same radio channel.
28
APDTIMINT=3
APCFPOLLABLE=false
APCFPOLLREQ=false
APCFPPERIOD=3
APCFPMAXDURATION=100
APPROBEDELAY=100
APCHANNEL=6
APBASICRATES="2 4"
APOPRATES="2 4 11 22"
; Station Settings (SSID is all we have for now)
; Set the DESIRED_SSID to the SSID of the AP which you want to link.
DESIRED_SSID="WLAN_PRISM2"
12) Edit your network.opts file to set up your IP settings.
# vi /etc/pcmcia/network.opts
;Transceiver selection, for some cards -- see 'man ifport'
IF_PORT=""
; Use BOOTP? [y/n]
BOOTP="n"
; Use DHCP? [y/n]
; If your local network has DHCP, you can set DHCP to 'y' then save the
; file and exit.If you set DHCP to 'n', you must set the items below.
DHCP="n"
; Host's IP address, netmask, network address, broadcast address
; It is a example to set the items for my local network. You must depend
; on your system.
IPADDR="192.168.0.201"
NETMASK="255.255.255.0"
NETWORK="192.168.0.0"
BROADCAST="192.168.0.255"
; Gateway address for static routing
GATEWAY="192.168.0.1"
; Things to add to /etc/resolv.conf for this interface
DOMAIN="lcat"
SEARCH="