User's Manual
Table Of Contents
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- An Ad-Hoc wireless LAN is a group of computers, each equipped with one GL-241101 adapter, connected as an independent wireless LAN. Computers in a specific Ad-Hoc wireless LAN must be configured to share the same radio channel.
29
DNS_1="140.118.7.125"
DNS_2=""
DNS_3=""
; You can save the file and exit now if you don't care the other options.
; NFS mounts, should be listed in /etc/fstab
MOUNTS=""
; For IPX interfaces, the frame type and network number
IPX_FRAME=""
IPX_NETNUM=""
; Extra stuff to do after setting up the interface
start_fn () { return; }
; Extra stuff to do before shutting down the interface
stop_fn () { return; }
13) Restart pcmcia-cs with the command
# ln -s /etc/rc.d/init.d/pcmcia pcmcia
# ./pcmcia restart
14) Insert the card. A solid LED indicates that the SSID you specified was found,a bss was joined,
and the firmware completed the authenticate and associate processes.
15) Run ifconfig and route to determine if the device WLAN0 is includes and your IP and route
settings are listed as you wanted them.It's also a good idea to look at the file /etc/resolv.conf to
see if your nameserver address has been set up correctly.