User Manual

37
3-6 GL2411V1-A D
RIVER
I
NSTALLATION
-W
INDOWS
®
M
E
NOTE
: Before proceeding, have the Windows
®
Me CD ready, as it will be required during the
software installation process.
1. After inserting the GL2411V1-A PCMCIA card into a standard type II or type III PCMCIA
card slot and powering on the PC under Windows
®
Me, Windows
®
Me will automatically
detect the GL2411V1-A and prompt you to install the necessary driver. Check “Specify the
location of the driver (Advanced)” and click “Next” to begin the installation.
2. Insert the driver disk. Check “Specify a location” and browse “D:\pc-oem\driver\WIN9x”
folder. Then click “Next”. (where “D” represents the CD-ROM drive)
3. Windows
®
Me will install the driver. As the driver files are being copied to the appropriate
location, you will be prompted to insert the Windows
®
ME CD.
4. After installation, please click "Finish"
5. After successful installation of the GL2411V1-A and its driver, continue the installation
process by configuring the GL2411V1-A adapter properties. To configure the GL-24110P
Adapter completes the following steps.