User Manual

42
NOTE
:
Fixed 11 Mb/s is the preferred “Value” for environments where the client has line of
sight access and is a short distance away from the AP. Fully Auto is the recommended
setting for clients that are farther away from the AP and where there may be interference
between the client and the AP.
21. Select “Use Wep”, and choose a “Value” for “128 bit”, “64 bit” or “Disabled”. (See Chapter
4-2 and Appendix B Glossary).
22. After the configuring the “Properties”, click “OK”.
23. Select “TCP/IP” and click “Properties”.