User Manual

43
24. From the “TCP/IP Properties” menu, please select the “IP Address” tab. If you are using a
DHCP server, you can click “Obtain an IP address automatically” to get IP from the DHCP
sever. Otherwise, you must click “Specify an IP address” and key in your IP address and
subnet mask.
25. If you use DHCP sever, please click “OK” and jump to step 32. If you do not use a DHCP
server and must manually enter the IP address and DNS number. Please select the
“Gateway” tab and key in your gateway. Then select the “DNS Configuration” tab and key
in the DNS sever IP address which is near your PC. Then click “OK”.
26. From the “Network” menu, please select the “Identification” tab. Enter a “Computer name”
“Workgroup” and “Computer Description”. Click “OK”.