User Manual

; NFS mounts, should be listed in /etc/fstab

MOUNTS=""

; For IPX interfaces, the frame type and network number

IPX_FRAME=""

IPX_NETNUM=""

; Extra stuff to do after setting up the interface

start_fn () { return; }

; Extra stuff to do before shutting down the interface

stop_fn () { return; }

13)

Restart pcmcia-cs with the command

# ln -s /etc/rc.d/init.d/pcmcia pcmcia

# ./pcmcia restart

14)

Insert the card.

A solid LED indicates that the SSID you specified was found,a bss was joined,

and the firmware completed the authenticate and associate processes.

15)

Run ifconfig and route to determine

if the device WLAN0 is includes and your IP and route settings are listed as you wanted

them.It's also a good idea to look at the file /etc/resolv.conf to see if your nameserver address

has been set up correctly.