User Manual

62
!"
2-3) Check that you have inserted the right card and have installed the proper driver.
If the GL2411V1-A does not function after attempting the above steps, remove the PCMCIA Card,
and do the following:
!"
From the run window enter, c:\windows\system, locate and delete the cw10.sys file
!"
Open the “Control Panel” double-click “System” and delete PRISM25 IEEE 802.11 PC-
card Adapter.
!"
Restart the PC and repeat the hardware and software installation steps outlined in
Chapters 3 and 4.
The GL2411V1-A station cannot communicate with other computers linked via Ethernet in
the Infrastructure configuration.
Probable Solution:
!"
Ensure that the GL2411V1-A with which the station is associated is powered on.
!"
Confirm the station is configured with the same operating radio channel as the GL2411V1-
A. If the IDs are different, change the GL2411V1-A and all the stations within the BSS to
another radio channel.
!"
Ensure that the station is configured with the same security options as the GL2411V1-A,
and can be turned off and on with the same security key.
!"
Confirm that the BSS ID is the same as the GL2411V1-A for a roaming disabled station.
Alternately confirm that the ESS ID is the same as the GL2411V1-A for a roaming enabled
station.